12/24 Hour; Care And Cleaning - Kenwood BrewMaster CM450 series User Manual

You may notice fragments of tea of day.
leaves in the dispensed tea – this 5 Push the "Auto/ON/OFF" button
is normal. once and "PRO" will show in the
After use always wash the parts display indicating that the brew
thoroughly. If alternating between cycle will begin at the set time.
tea and coffee making, take extra The light will flash on and off.
care to ensure the coffee tank and Note: if the "Auto/ON/OFF"
permanent filter are well washed button is pushed twice, brewing
and rinsed. will begin immediately.
You may wish to purchase an ● To check the programmed time,
additional permanent filter and press the "Prog" button and the
coffee tank to have dedicated programmed time will flash. Press
parts for tea and coffee making. "Prog" button again to return back
See 'service'. to the clock.
CM550 series only

care and cleaning

● Always switch off, unplug and
to set the clock.
1 Plug in the BrewMaster. The allow to cool before cleaning.
numbers on the clock will flash ● Never put the machine in water or
let the cord or plug get wet.
until the time of day is set or one
Don't wash parts in the
minute elapses. ●
2 To set the time of day: dishwasher, except the filter
holder and coffee tank.
● Press the "H" button to set the
current hour with AM or PM.
coffee tank, drip tray, filter
● Press the "M" button until you
holder and permanent filter
reach the current time.
● Wash, then dry thoroughly.
body
to select 12 or 24 hour
● Wipe with a damp cloth, then dry.
clock. Don't use abrasives – they'll
scratch the plastic.
To change from a 12 hour clock
descaling
(AM/PM) to a 24 hour clock or
Regularly descale to optimise your
vice versa. Press the "H" and "M"
BrewMaster's performance. We
buttons simultaneously and whilst
recommend once a month for
holding them in press the "Prog"
heavy usage.
button at the same time.
to descale
to programme automatic
1 Buy a suitable descaler.
brew
2 Descale the machine following the
1 Set the clock to the correct time of
instructions on the descaler.
day.
3 After descaling, run at least 2 lots
2 Press the "Prog" button and the
of water through the machine to
digits will flash.
clean it out. Each time pour one
3 Press the "H" and "M" buttons
coffee tank of cold water filled to
until the desired brewing time is
the "MAX" level into the water
reached.
reservoir.
4 Press the "Prog" button to confirm
4 Wash the parts.
setting. The digits will stop
flashing and return to the set time
service guarantee
If your BrewMaster goes wrong
●
If the cord is damaged it must, for
within one year from the date you
safety reasons, be replaced by
bought it, we will repair it (or
Kenwood or an authorised
replace it if necessary) free of
Kenwood repairer.
charge provided:
●
you have not misused, neglected
UK
or damaged it;
If you need help with:
●
it has not been modified (unless by
●
using your machine or
Kenwood);
●
servicing, spare parts or repairs (in
●
it is not second-hand;
or out of guarantee)
●
it has not been used
call Kenwood Customer Care on
commercially;
023 92392333. Have your
●
you have not fitted a plug
model number ready - it's on
incorrectly; and
the underside of the BrewMaster.
●
you supply your receipt to
●
spares and attachments
show when you bought it.
call 0870 2413653. To buy an
This guarantee does not affect
additional permanent filter quote
your statutory rights.
part/reference number 683747
and quote 683591 for the black
coffee tank and 683802 for the
silver coffee tank.
●
other countries
Contact the shop where you
bought your machine
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK
www.kenwoodworld.com
CM450 series
CM550 series
55825/3