Power On Set Up - KETRON XD3 Instructions Manual

Power On Set Up

Power On Set Up
It will soon become clear to you that each time you power on the XD9, there are some features that always default to values set by Ketron (which
you almost always have to change or modify prior to using the keyboard). Some of the most important settings programmed for the use of your
XD9 can be stored in such a way that they are automatically called up when turning the instrument on, thus avoiding loss of time involved dur-
ing re-programming. The parameters are not grouped on the same page, but distributed in a number of menus such as Arrange Mode, Arrange
View, MIDI as well as the push buttons on the control panel. The following table reports all the parameters that can currently be stored and
automatically set on turning the instrument on.
1 Touch (led)
4 switch mode
Accordion Mode
Arabic mode
Autocrash
Bass Lock
Bass to Lower
Bass Octave
Bass Mono / Poly
Fingered
Finger 2
For this function just one invisible memory location exists, that is maintained even when the keyboard is Off. There is, however, the possibility
to store a number of Power On Set Up settings on the disk. If you feel that your present setting is the optimal one for the parameters listed in
the above table, you may store or save them on the disk for future recall using the following procedure:
Press the SAVE/ENTER button to activate the procedure.
Select F3 Power On Setup.
The following four functions are displayed:
F5 Escape: deletes the operation and returns to the main page of the display.
F8 Disk Save: Saves the Power On Set Up to the disk you selected before confirming the saving in Flash RAM. To save another Power On Set
Up file it is necessary that the previous one is renamed using the Rename function in the Disk menu (please refer to the Disk
section).
F9 Default: This restores the initial conditions of all parameters included in the above table as determined by Ketron.
F10 Save: This saves the current settings in the Flash RAM memory of the XD9
Midi Menu
Microphone Active / Inactive
Lower off on stop
Music Volume
Delay Lock
Micro Dry On Stop
Setup Video mode, color zoom
Pianist Mode (standard, auto)
Tempo Step
Arranger lock
Automatic switch off registr.
Global Bass retrigger
Hold on stop
Live Drum
Interactive Arrange
Bass Boost
Out Levels ( Menu Effects)
Sounds selection mode
Styles selection mode by numbers or by pages
Gm Tx-Rx channelsDynamic Arranger
New Operating System updates (found on the internet at www.ketron.it) may further modify the above lists.
48
XD9-XD3
Easy 1
Easy 2
Song Balance
Registration
Switch On / Off
Modulation Amount / Rate
Vocalist Active-Inactive-Internal - None
Bass to Pedal
Bass hold
Bass Retrigg. Accordion
Fixed Dynamic Value
Dynamic Curve
Equalizer
Global transposer
Global Tune
Harmony type
Lower 1 Hold
Lower 2 Hold
Lower Lock
Pattern (led)
Pedalboard
Pianist Sustain
Portamento time
Reverb Level
Reverb Lock
Split point
Sustain 2nd voice
Swell to right
Sync time
Enhancer
Master Volumes