Menu Page P5; Vtr Mode Select Screen - Panasonic AG-DTL1E Operating Insructions

Setting menus

Menu page P5

[VTR MODE SELECT]
(TAPE IN) STOP
(TAPE END)
MODE STOP
ALARM IN STOP
(EJECT OPERATION) EJECT
(VIDEO MODE) AUTO
(COMB FILTER) OFF

VTR MODE SELECT screen

P5
Menu item
(TAPE IN) For setting the operation mode that is to be established when the
cassette tape has been inserted into the unit.
STOP
REC
REW 5 REC: The tape is first rewound to its start, and then
(TAPE END) For setting the operation mode that is to be established when the
MODE tape-end position is reached.
STOP
BUZZER : The unit is set to the stop mode at the tape-end position,
REW
REPEAT : The tape is rewound to its start position, and recording is
EJECT
(TAPE END) For setting the operation mode that is to be established when the
ALARM IN tape-end position is reached after alarm recording or sensor
recording has been performed.
STOP
CONTINUE: The unit continues with the operation selected as the
(EJECT For setting the EJECT button operation.
OPERATION) EJECT
REW 5 EJECT: The tape is ejected after it has been rewound to its
(VIDEO MODE) For setting the colour of the video output signal.
AUTO : The colour is automatically switched in accordance with the
B/W
(COMB FILTER) For selecting the filter or filters to be used when separating the
composite signal into its Y (luminance) and C (chrominance)
components.
ON
OFF
The underlining indicates the factory mode setting.
45 (E)
Description of function
: The unit is set to the stop mode.
: Recording is performed.
recording is performed.
: The unit is set to the stop mode at the tape-end position.
and the buzzer sounds.
: The tape is rewound to its start position, and then the unit
is set to the stop mode.
performed.
: The tape is ejected at the tape-end position.
: The unit is set to the stop mode at the tape-end
position.
The tape is ejected when EJECT has been selected as
the (TAPE END) MODE setting.
(TAPE END) MODE setting regardless of whether an
alarm signal is input.
: The tape is ejected by operating the button.
start position by operating the button.
input signal.
: The signal is forcibly set to monochrome.
: The comb filter is used to separate the composite signal
into its Y (luminance) and C (chrominance) components.
: The notch filter is used to separate the Y (luminance)
component, and the band-pass filter is used to separate the
C (chrominance) component.