Zenith Z42P3 Installation And Operating Manual page 24

SERVICE
RGB IN
(PC)
AUDIO IN REMOTE
(RGB/DVI)
CONTROL IN
HDMI / DVI IN
Installation
RS-232C IN
(CONTROL & SERVICE)
- This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
When connecting with a D-sub 15 pin cable
When connecting with a HDMI to DVI cable
1
Connect the DVI output of the PC to the HDMI IN 1(DVI) jack on the set.
Connect the audio outputs of the PC to the AUDIO IN(RGB/DVI) jack on the set.
2
Turn on the PC and the set.
3
Select HDMI1/DVI input source with using the INPUT button on the remote control.
4
24
RGB IN
(PC)
AUDIO IN AUDIO IN REMOTE
(RGB/DVI) (RGB/DVI)
CONTROL IN CONTROL IN
RS-232C IN RS-232C IN
(CONTROL (CONTROL & SER & SERVICE) VICE)
2
1
AUDIO
RGB-PC OUTPUT
SERVICE SERVICE
• If the PC has a DVI output and no HDMI output, a separated audio connection is necessary.
• If the PC does not support Auto DVI, you need to set the output resolution appropriately. To get the
best picture quality, adjust the output resolution of PC graphics card to 1024x768, 60Hz.
PC Setup
Connect the RGB output of the PC to the RGB IN
1
(PC) jack on the set.
Connect the PC audio outputs to the AUDIO
2
IN(RGB/DVI) jack on the set.
3 Turn on the PC and the set.
4 Select RGB-PC input source with using the
INPUT button on the remote control.
PC
RGB IN RGB IN
(PC)
AUDIO IN REMOTE REMOTE
HDMI IN HDMI IN (RGB/DVI) CONTROL IN CONTROL IN
2
1(DVI) 1(DVI)
RS-232C IN
(CONTROL & SERVICE)
1
2
PC
DVI-PC OUTPUT
AUDIO
RGB IN
(PC)
AUDIO IN REMOTE
(RGB/DVI)
CONTROL IN
RS-232C IN
(CONTROL & SERVICE)