External Equipment Connections; Antenna Or Cable Connection - Zenith Z42P3 Installation And Operating Manual

Installation

External Equipment Connections

External Equipment Connections
NOTE: All cables shown are not included with the TV
Analog and Digital TV signals provided on antenna
- Antenna or Cable Service without a Cable Box Connection.
- For optimum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Wall Antenna Socket
VHF Antenna
UHF Antenna
Outdoor Antenna
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Analog and Digital TV signals provided on cable
Cable TV Wall Jack
Analog and DTV signals provided on two separate antennas
Antenna
Cable TV Wall Jack
ANTENNA/
CABLE IN
16

Antenna Or Cable Connection

RF Coaxial Wire (75 ohm)
Turn clockwise to tighten.
RF Coaxial Wire (75 ohm)
Turn clockwise to tighten.
Bronze Wire
RF Coaxial Wire (75 ohm)
Turn clockwise to tighten.
RF Coaxial Wire (75 ohm)
Bronze Wire
VIDEO
• In a poor signal area to improve picture quality, purchase and install a sig-
nal amplifier.
• If the antenna needs to be split for two TV's, install a "2-Way Signal Splitter"
OPTICAL
signal
in the connections.
amplifier
DIGITAL AUDIO
S-VIDEO VIDEO
• If the antenna is not installed properly, contact your dealer for assistance.
OUT
ANTENNA/
CABLE IN
Bronze Wire
Be careful not to bend the bronze wire when
connecting the antenna.
ANTENNA/
CABLE IN
AUDIO
( )
AUDIO
OPTICAL
DIGITAL AUDIO
OUT
OPTICAL
DIGITAL AUDIO
OUT
ANTENNA/
CABLE IN
VIDEO
S-VIDEO
VI
S-V
VIDEO
S-VIDEO
VIDEO
OPT
DIGITA
O
S-VIDEO
VID
VIDEO