Subscribe to Our Youtube Channel
Related Manuals for Zenith Z42PJ240
Summary of Contents for Zenith Z42PJ240
- Page 1 Installation Operating Guide Model Numbers J Z42PJ240, ZSOPJ240 I PLASMA ® _i,i, i!]ii ¸¸ iii i!i !!_ _iii_ zenith © Copyright 2010, [_6 Electronics USA, Inc.
-
Page 2: Warning / Caution
WARNING / CAUTION ..WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO Class B digital device USER SERVICEABLEPARTS INSIDE. -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Protect the power cord from being walked on or pinched particularly at plugs, convenience Keep these instructions. receptacles, and the point where they exit from Heed all warnings. the apparatus. Follow all instructions. Do not use this apparatus near water. - Page 4 SAFETYINSTRUCTIONS WARNING - To reduce the risk of fire or electrical Never touch this apparatus or antenna during a thunder or lighting storm. shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands.
- Page 5 ANTENNAS Ventilation Outdoor antenna grounding Install your TV where there is proper ventila- tion. Do not install in a confined space such as If an outdoor antenna is installed, follow a bookcase. Do not cover the product with precautions below. An outdoor antenna system cloth or other...
-
Page 6: Table Of Contents
CONTENTS WARNING / CAUTION ......2 - Channel Editing ........Channel List ............ SAFETY INSTRUCTIONS ......3 Favorite Channel Setup ........FEATURES OF THIS TV ......8 Favorite Channel List ........Brief Information ..........Input List ............Input Label ............. Accessories ............ - Page 7 Troubleshooting ..........Auto Volume Leveler (Auto Volume) ....Maintenance ........... Preset Sound Settings (Sound Mode) ....Product Specifications ........Sound Setting Adjustment - User Mode ... 58 IR Codes ............Infinite Sound ..........External Control Through RS-232C ....88 Balance ............TV Speakers On/Off Setup ......
-
Page 8: Features Of This Tv
FEATURES OF THIS TV ,,,IThis feature is not available for all models. High-definition television. High-resolution digital Manufactured under license from Dolby Laboratories. iT[ DOLBY "Dolby "and the doub[e-D symbol are trademarks of television broadcast and playback system composed DIGITAL[ of roughly a million or more pixels, 16:9 aspect-ratio Dolby Laboratories. -
Page 9: Accessories
PREPARATION ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact dealer where you purchased the TV. The accessories included may differ from the images below. "o ®®® ®®® ®®® © !!!!!!!!!iliiiiiiiiiiiiiiiiiiiiiiii ,, _iiiiililililiiiiii_!!_iiii ¸¸¸... -
Page 10: Frontpanelinformation
PREPARATION FRONTPANELINFORMATION ,,,IImage shown may differ from your TV. Intelligent Sensor Adjusts picture according the surrounding conditions. Power/Standby Indicator Remote Control Illuminates red in standby Sensor mode. The LED is off while the TV remains on. CHANNEL ENTER VOLUME POWER INPUT MENU Button... -
Page 11: Back Panel Overview
BACK PANELINFORMATION Image shown may differ from your TV. iiiiiiiiiiiiii_ii_!ii!iiii!!ili!ili!!iiiii_!:_iii....I'rl iiii iiiiiiiiiiiiiiiiiiiii i !iiiii r.*Vll HDMI/DVI COMPONENT Digital Connection. Supports HD video and Digital Analog Connection. Supports audio. Doesn't support 480i. Uses a red, green, and blue cable for video & red and white for audio. -
Page 12: Stand Instruction
PREPARATION STAND INSTRUCTION m Image shown may differ from your TV. Installation Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. © Assemble the parts of the Stand Body with the Stand Body Stand Base of the TV. - Page 13 Detachment Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. © Loose the bolts from TV. M4x28 Detach the stand from TV. PROTECTION COVER (Fix a Guide to the Outsides.) Protection Cover After removing stand,...
-
Page 14: Cable Management
PREPARATION CABLE MANAGEMENT ,,,IImage shown may differ from your TV. "0 connecting necessary, After the cables install CABLE HOLDER shown and bundle the cables. To connect additional equipment, see EXTERNAL EQUIPMENT SETUP section. © CABLE HOLDER... -
Page 15: Desktop Pedestalinstallation
DESKTOP PEDESTALINSTALLATION ,,,IImage shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. I"I"1 4 inches 4 inches 4 inches 4 inches © SWIVELSTAND (This feature is not available for all models.) After installing the TV, you can adjust the TV manually to the left or right direction by 20 degrees to suit your... -
Page 16: Vesawall Mounting
PREPARATION VESAWALL MOUNTING Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest installer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. r'rl We recommend that you use an LG brand wall mount when mounting... -
Page 17: Securing The Tv To The Wall To Preventfalling When The Tv Is Used On A Stand
SECURING THE TV TO THE WALL TO PREVENTFALLING WHEN THE TV IS USED ON A STAND You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount). llllll_ Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. -
Page 18: Antenna Or Cable Connection
PREPARATION To prevent damage do not connect to the power outlet until all connections are made between the devices. ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box l-rl Connection. For optimum picture quality, adjust antenna direction if needed. -
Page 19: Hd Receiver Setup
EXTERNAL EQUIPMENT SETUP 01_ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. llllll_ Image shown may differ from your TV. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. - Page 20 HDMI Connection 1. How to connect onnect the digital set-top box to HDMI/DVI IN 1, 2 or3. No separate audio connection is necessary. HDMI supports both audio and video. 2. How to use Turn on the digital set-top box. (Refer to the owner's manual for the digital set-top box.) Select the HDMI1, 2 or 3 input source on the TV using the INPUT button on the remote control.
- Page 21 DVI to HDMI Connection 1. How to connect onnect the DVI output of the digital set-top box to the HDMI/DVI IN 1,2 jack on the TV. Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI) jack on the TV.
-
Page 22: Dvd Setup
EXTERNALEQUIPMENT SETUP DVD SETUP Component Connection 1. How to connect Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO 1 jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). Connect the audio outputs of the DVD to the COMPONENT IN AUDIO... - Page 23 HDMI Connection 1. How to connect onnect the HDMI output of the DVD to the HDMI/DVI IN 1,2 or 3 jack on the TV. No separate audio connection is necessary. HDMI supports both audio and video. "O 2. How to use 01_ S elect the HDMI1, 2 or 3 input source on the TV using...
-
Page 24: Vcr Setup
EXTERNALEQUIPMENT SETUP VCR SETUP Antenna Connection 1. How to connect Connect the RF antenna out socket of the VCR to the ANTENNA/CABLE IN socket on the TV. Connect antenna cable antenna in socket of the VCR. "O Wall Jack 2. How to use Set VCR output switch to 3 or 4 and then Antenna "O... -
Page 25: Othera/V Sourcesetup
OTHERA/V SOURCESETUP Camcorder 1. How to connect Video Game Set Connect AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red) 2. How to use 01_ S elect the AV2 input source on the TV using the INPUT... -
Page 26: Audio Out Connection
EXTERNALEQUIPMENT SETUP AUDIO OUT CONNECTION Send the TV's audio to external audio equipment via the Audio Output port. 1. How to connect r'r3 Connect one end of the optical cable to the TV's OPTICAL port of DIGITAL AUDIO OUT. r-r3 _>... -
Page 27: Pc Setup
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15 pin) Connection 1. How to connect onnect the VGA output of the PC to the RGB (PC) jack on the TV. Connect the PC audio output... - Page 28 EXTERNALEQUIPMENT SETUP I"1"1 I"1"1 I"1"1 I"1"1 "0 Supported Display Specifications (RCB-PC, HDMm-PC) 31.468 70.09 31.469 70.08 31.469 59.94 35.156 56.25 37.879 60.31 48.363 60.00 47.776 59.87 47.712 60.015 63.981 60.020...
- Page 29 Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The Position, Phase, and Size can also be adjusted. Select PICTURE. Select Resolution. Select the desired resolution. Select Screen (RGB-PC). Auto Configure Automatically adjusts picture position and minimizes image instability.
- Page 30 EXTERNALEQUIPMENT SETUP Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. Select PICTURE. 01_ P osition: This function is to adjust pic- ture to left/right...
- Page 31 Screen Reset (Reset to original factory values) Returns Position, Size, and Phase to the default factory settings. This feature operates only in RGB-PC mode. _ii_iiii!iiiiii!!i_iiiiI!i_iiiiiiii_iii_iii_i!_ii!!iiiiiH_!iiiiiIiIi!iiiiiIiiiiI!!i_!_iiiiiiii!!iii_iiiiiiii_iiiiii_iiiii!_iii_i_iiiiiii!Ji_i_iii!iiiiiiiiii!!i_iiiiii_iiiiiiii_i!iiii!iiII_iii!_iiiiii!!iIIii_iiiii_ii_ii!!iiiiii_i_ Select PICTURE. Select Screen (RGB-PC). Select Reset. Select Yes.
-
Page 32: Remote Control Functions
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. INFO Displays channel information at the top of the screen. Q.MENU Opens the list of Quick Menu options. POWER Turns the TV on from standby or off to standby. - Page 33 NUMBERbutton -- (DASH) Used to enter a program number for multiple program channels such as 2-I, 2-2, etc. LIST Displays the channel list. -r" FLASHBK Tunes to the last channel viewed. < THUMBSTICK Navigates the on-screen menus and adjusts the system settings to your preference. (Up/Down/Left Right/ENTER) >...
-
Page 34: Turning On Tv
WATCHING TV / CHANNEL CONTROL TURNING ON TV First, connect power cord correctly. At this moment, TV is in standby mode. 0,_ I n standby mode to turn TV on, press the (b/l, INPUT, CH ( ^ or v ) button on the TV or press the POWER INPUT, CH(^ or v ), Number (0~9) button on the remote control. -
Page 35: Initial Setting
INITIAL SETTING This Function guides the user to easily set the essential items for viewing the TV for the first time when pur- chasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be acti- vated from the user menus. -
Page 36: On-Screenmenusselection
WATCHING TV / CHANNEL CONTROL ON-SCREENMENUSSELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. < > each menu. a menu item. Accept the current selection. Return to TV viewing. -
Page 37: Quick Menu
QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. _ii_ Aspect Ratio: Selects your desired picture format. Picture Mode: Selects factory... -
Page 38: Channelsetup
WATCHING TV / CHANNEL CONTROL CHANNELSETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run this function if you change your residence or move the TV. Also, make sure to run this function with the antenna connected... -
Page 39: Add/Delete Channel (Manual Tuning)
Add/Delete Channel (Manual Tuning) If you select DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quali- ty of the signal being received. -r" < > Select CHANNEL. © © Select Manual Tuning. 01_ T he TV will ask for a password if parental Select DTV, TV, CADTV, or CATV. -
Page 40: Channel Editing
WATCHING TV / CHANNEL CONTROL Channel Editing When a channel number is deleted, it means that you will be unable to select it using CH ^, v button during TV viewing. If you wish to select the deleted channel, directly enter the channel number with the NUMBER buttons or select it in the Channel Edit menu. -
Page 41: Channel List
CHANNEL LIST You can check channels which are stored in the memory by displaying the channel list. This padlock is displayed when the channel is locked with parental control. -r" < > Displaying Channel List © © Display the Channel List. -
Page 42: Favoritechannel Setup
WATCHING TV / CHANNEL CONTROL FAVORITECHANNEL SETUP Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Favorite Channels are a convenient feature that lets you quickly select channels of your choice without waiting for the TV to select through all the in-between channels. -
Page 43: Briefinformation
BRIEFINFORMATION Brief Info shows the present screen information. Show the Brief Info on the screen. Return to TV viewing ¢h -r" < > © © @ Program title Multilingual : The program contains two or more audio services. Use the Q.MENU menu to select wanted Audio. -
Page 44: Input List
WATCHING TV / CHANNEL CONTROL INPUT LIST Only these input signals which are connected to a TV can be activated and selected. -r" Select the desired input source. < ]--I_[ ] --11_[ ]_1_[ Componentl i_l_[ Component2 ] > HDMI3 i _--[ HDMI2 HDMI1 _1--... -
Page 45: Input Label
INPUT LABEL This indicates which device is connected to which input port. -r" < > With With using OPTION menu using INPUT button Select OPTION. Select the source(except TV). Select Input Label. Select the label. Select the source. Return to the _revious menu. Select the label. -
Page 46: Picture Size (Aspect Ratio) Control
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. RGB-PC input source use 4:3 or 16:9 aspect ratio. ii!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i _!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!!I_II_!I!_II_ _!_!!_!_!i_ii_i_!Zii_ii_i_!_!ii_ii_i_!_!ii_ii_i_!_!ii_ii_i_!_!i !_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_i_i_ _iiii!!i!!iii i i iiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i_!i!_!_!_!!_!!_!!_!!_!!_!!_! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - Page 47 16:9 Adjust the picture horizontally, in a linear pro- Choose 4:3 when you want to view a picture with portion to fill the entire screen. an original 4:3 aspect ratio. Just Scan Zoom Normally the edges of video signals are cropped 1-27o.
-
Page 48: Powersaving
PICTURECONTROL POWERSAVING It reduces the TV's power consumption. You can increase the brightness of your screen by adjusting the Power Saving level or by setting the Picture Mode. This feature is disabled in "Picture Mode-Cinema". _:_!_!i_J_!iii!_i!_i!ii_ii_ii_i_!!!_i!ii!i!iiiiii_ii!_;_!_i_:_i!i!_i!_:_::i_:i!:_i:_iiii _;i:!!i!!i_ii!iiii_iii!i!!!i!iii_i _i_ii_iii_i_i!!i!!i!i_!i_i_i_i_i!_!i_!_i_!_i!i!!i!iiiiiiii_!_i!!_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_iii_i_i_i_i_i_i_ii_ii_ii:i_ Select PICTURE. 01_You can also adjust... -
Page 49: Preset Picture Settings(Picture Mode)
PRESETPICTURE SETTINGS (PICTURE MODE) There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually. Select Picture Mode. _Vivid, Standard, _e__, Cinema, © Sport, and Game Settings are preset for the optimum picture quality at the Select Vivid, Standard,... -
Page 50: Manual Picture Adjustment-Usermode
PICTURECONTROL MANUAL PICTURE ADJUSTMENT-USERMODE Adjust the picture appearance to suit your preference and viewing situations. ¸............. "O Select PICTURE. Contrast: Increase or decrease the gra- dient of the video signal. You may use Contrast when the bright part of picture is satu- Select Picture Mode. -
Page 51: Picture Improvement Technology
PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video seeing differently for each input. To reset to the factory default screen after making adjustments to each video mode, execute the "Reset"... -
Page 52: Expertpicture Control
PICTURECONTROL EXPERTPICTURE CONTROL By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used by a professional to help optimize the TV performance in the environment the TV is in. - Page 53 Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid.
-
Page 54: Picture Reset
PICTURECONTROL PICTURE RESET Settings of the selected picture modes return to the default factory settings. [ [[ [ [[[ [[ [[ Select PICTURE. "O Select Reset. Initialize the adjusted value. Return to TV viewing. -
Page 55: Imagesticking Minimization (Ism) Method
IMAGESTICKING MINIMIZATION (ISM) METHOD A frozen still picture displayed on the screen for prolonged periods can result in a ghost image. You can use Orbiter to help prevent image sticking. The other two functions are for removing a ghost image. "O Select OPTION. -
Page 56: Auto Volume Leveler(Auto Volume)
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER(AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. -
Page 57: Presetsound Settings (Sound Mode)
PRESETSOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content. Select Sound Mode. l'rl _ Standard, Music, Cinema, Sport, Game preset optimum sound quality at the factory. -
Page 58: Sound Setting Adjustment- Usermode
SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT- USERMODE Adjust the sound to suit your taste and room situations. Select AUDIO. Select Treble or Bass. Make appropriate adjustments. Select Sound Mode. Return to the previous menu. Select Standard, Music, Cinema, Sport, or Game. -
Page 59: Balance
BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. _iiiiiii}iDi}ii::iiiii!iiiii_ii!i!i!ii _iiiM_Ii!i!!!i@_i!{_i!_i_Mii!!@iii_i_iI_Ii_i_@iii_iiii_iiiiiii_BiiiJJ_(i{_i}!iiiii!!i!_iii_iiiiiiii_!i_Hiii_iiii!_i_Ii!iiii@_@iii_@i£i_ u_i:o Select AUDIO. Select Balance. Make appropriate adjustments. Return to the previous menu. Return to TV viewing. l'rl... -
Page 60: Tv Speakerson/Off Setup
SOUND & LANGUAGE CONTROL TV SPEAKERSON/OFF SETUP Turn the TV speakers off if using external audio equipment. Select AUDIO. Select TV Speaker. l'rl Select 0 n or Off. Return to the previous menu. Return to TV viewing. -
Page 61: Audio Reset
AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. Select AUDIO. Select Reset. l'rl Initialize the adjusted value. Return to TV viewing. -
Page 62: Stereo/Sap Broadcasts Setup
SOUND & LANGUAGE CONTROL STEREO/SAP BROADCAST SETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accom- panies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. -
Page 63: Audio Language
AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. iiii!iiiiiiii/ililMiiiiii!i!iliiiiiiiiiiiiiiiil ¸_i_iiiiiiiiiIi!;i!;!_iiM_i_i!!iji_iiiiiiiiiiiiM!ii_iii_iiiiiiiii!i_i_i!iM_!i!iiii_iiiiiiiiIiiiii Select OPTION. Select Language. l'rl Select Audio. Select your desired language. Return to the previous menu. Return to TV viewing. -
Page 64: On-Screen Menus Language Selection
SOUND & LANGUAGE CONTROL ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. Select OPTION. Select Language. l'rl Select Menu. Select your desired language. From this point on, the on-screen menus will be shown in the selected language. Return to the previous menu. -
Page 65: Caption Mode
CAPTION MODE Analog Broadcasting System Captions Captions are provided to help people with hearing loss watch TV. Select a caption mode for displaying cap- tioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. -
Page 66: Digital Broadcasting System Captions
SOUND & LANGUAGE CONTROL Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On. -
Page 67: Caption Option
Caption Option Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is turned _!ii:!!i_i_!i_iiii!ii_!i _iii!!ii_i_i:i:!i!_i _iiii!_i_!!_!i:_:i:!!_!_!_i!_!!_!!:_! Select OPTION. _1_ S ize: Set the word size. _ Font: Select a typeface for the text. Select Caption _ Text Color:... -
Page 68: Clock Setting
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function. -
Page 69: Manual Clock Setup
Manual Clock Setup If the current time setting is wrong, set the clock manually. iiiiii_i_ii_ii_i_!_!_!_!_!_!_!_!_i_i:ii_iiiiiii_i_i_i!i!ii_i_i_ ¸:i ¸:i¸:i ¸:i ¸:i ¸:i¸:i ¸:i ¸:i¸:i ¸:i ¸:i ¸:i¸:i ¸:i ¸:i¸:i ¸:i ¸:i ¸:i¸:i ¸:i ¸:i¸:i ¸:i ¸:i ¸:i¸:i ¸:i ¸:i ¸:i¸:i ¸:i ¸:i¸:i ¸:i ¸:i ¸:i¸:i ¸:i ¸:i¸:i ¸:i ¸:i ¸:i¸:i... -
Page 70: Auto On/Off Time Setting
TIME SETTING AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The Off Time function overrides the On Time function if they are both set to the same time. The TV must be in standby mode for the On Time to work. -
Page 71: Sleeptimer Setting
SLEEPTIMER SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. Select Sleep Timer. ,i,_ You can also adjust Sleep Timer the TIME menu. Select Off, 1 O, 2 O, 3 O, 6 O, 9 O, 120, 180, or 240 minutes. -
Page 72: Set Password & Lock System
PARENTALCONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broad- casting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. - Page 73 Lock System Enables or disables the blocking scheme you set up previously. _C_. Select LOCK. Input the password. Select Lock System. 01_ When you select 0 n, the Lock System Select 0 n or Off. is enable. © Return to the previous menu. ©...
- Page 74 PARENTALCONTROL / RATINGS Set Password Change the password by inputting a new password twice. Select LOCK. Input the password. Select Set password. Choose any 4 digits for your new password. As soon as the 4 digits are entered, re-enter the same 4 digits on the Confirm. Return to the previous menu.
-
Page 75: Channel Blocking
CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. Ch.Change Move Move Page Previous Block/Unblock _____SelectLOCK. Input the password. Select Block Channel. Select a channel to block or unblock. Block or unblock a channel. -
Page 76: Movie & Tv Rating
PARENTALCONTROL / RATINGS MOVIE & TV RATING Movie Rating (MPAA) Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. - Page 77 TV Rating Children Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audi- ences in the TV Rating - sub menu, your children can view those programs.
- Page 78 PARENTALCONTROL / RATINGS TV Rating General Based on the ratings, blocks certain TV programs that you and your family do not want to view. Select LOCK. Input the password. Select TV Rating-General. 01_ A ge (applies to TV-G,TV-PG,TV-14,TV- Select Age, Dialogue, Language, MA).
-
Page 79: Downloadable Rating
DOWNLOADABLE RATING This function is available only for digital channels. This function operates only when TV has received Regions Rating data. !i_iiiiii _iiiilil ¸iiii/ili _ii!:ig _i!ii_iiii!!iiiii/i!iiii!i!iii!ii!ii!ii!ii!iiiiiiiiiii_i_,_,i'i!_!iii]iiiilii _iii/!l!ii_:iiiiiiiiiiiiil!i_iiii]_i!_i_iiiiiiili ii ! !!!!!!!!!!!!!!!!_!!!!! !!!!! 01_ Based on rating table, your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. -
Page 80: External Input Blocking
PARENTALCONTROL / RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input. _i!!i_!iiiiiiiII!!!_i!iii!iii_:_:_:_:_i_iiiiiiiiiiiiii_iiiii!_iiiii_i_!i_i_i_i_iiiiiiiiiiiiiiiiii!i_i!:i:ii1ii!i!iii_iiiii_i!!_iiIiiiii_i!iWiiiiiiiii!!iiiiiiiiiii_i Select LOCK. Input the password. Select Input Block. Select input source. Select On or Off. Return to the previous menu. Return to TV viewing. -
Page 81: Key Lock
KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off. -
Page 82: Troubleshooting
APPENDIX TROUBLESHOOTING mini Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. i,i,i E nsure that the batteries are installed with correct polarity (+ to +, - to -). - Page 83 Press the VOL or VOLUME button. mini Sound muted? Press MUTE button. mini Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? mmff Adjust Balance in menu option. mini A change in ambient humidity or temperature may result in an unusual noise...
-
Page 84: Maintenance
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here's a great way to keep the dust off your screen for a while. -
Page 85: Product Specifications
PRODUCT SPECIFICATIONS 21.6 kg (4Z6 Ib) 30 kg (66.1 Ib) 20 kg (44.0 Ib) 2Z6 kg (60.8 Ib) AC 100-240 V - 50 / 60 Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 75 ohm 32 - 104°F (0 - 40 °C) -
Page 86: Ir Codes
IR CODES (This feature is not available for all models.) 1. How to Connect Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes Output waveform Single pulse, modulated with 3Z917KHz signal at 455KHz Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3... - Page 87 POWER Remote control Button(PowerOn/Off) Discrete IRCode Q:MENU Remote Control Button (TV Input Selection) POWER OFF Discrete IR Code (Only Power Off) FLASHBK Remote control Button MUTE Remote Control Button (AV1 input selection) VOL + Remote control Button Discrete IR Code VOL_ Remote Control Button (AV2 Input Selection)
-
Page 88: External Control Through Rs-232C
EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TV's functions externally. 01_ Note: RS-232C on this unit is intended to be used with third party RS-232C... - Page 89 RS-232C Configurations Either cable below can be used. D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Set ID Use this function to specify a TV ID number. Refer to 'Real Data Mapping'. Select OPTION. *Real data mapping 0 : Step 0 Select Set ID.
- Page 90 Command Reference List 00 ~ 01 01 Power O0 - 01 l_op.91) 02. Input Select 00 ~ 64 p.91) 14. Treble 00 - 64 O0 ~ 01 04. Screen Mute 00 ~ 64 00 - 01 05. Vol 16. Balance 00 - 64 O0 ~ 64 06.
- Page 91 Power (Command: k a) Data 01: Volume mute off (Volume On) To control Power On/Off of the TV. Acknowledgement [e] [ ] [Set ID] [ ] [OK/NG] [Data] [x] Volume Control (Command: k f) Transmission[k] [a][] [Set !D] [ ] [Data] [Cr] Data 00: Power Off Data 01 : Power On To adjust volume.
- Page 92 08: Normal 20: Color Wash OSD Select (Command: k I) Acknowledgement [p][] [Set ID][] [0KING] [Data] [x] To select OSD (On Screen Display) on/off. Transmission[k] [I][] [Set !D][] [Data] [Cr] Data 00: OSD off Data 01 : OSD on 1 9. Power saving (Command: j q) Acknowledgemen_ [I] [ ] [Set ID][...
- Page 93 Data 22. Channel Add/Del (Command: m b) The table above lists the binary code which must be To add and delete the channels. converted to Hexadecimal before sending. For example: The binary code to tune the sub source to an NTSC TransmiSsion [m] [b] [ ][set iD][ ][Data][Cr]...
- Page 94 zenith...
Need help?
Do you have a question about the Z42PJ240 and is the answer not in the manual?
Questions and answers
Can I connect a cellphone to my TV