Table of Contents
Advertisement
Loading the metadata
You can perform any of the following operations.
If necessary, make preparations prior to
undertaking the operations.
Loading the metadata
•
Insert the SD Memory Card on which the
metadata is recorded into the unit. (For details
on contents of the metadata, see the previous
page.)
Selecting whether to record the metadata on
the SD Memory Card
Initializing the metadata inside the unit
Displaying information on metadata inside the
unit
1
Set the POWER switch to ON. (Page 26)
•
The CAMERA lamp lights red.
2
Press the MENU button.
Menu operation (Page 95)
3
Touch the RECORD SETUP setting menu.
4
Touch
or
to switch pages, and select an
item.
META CARD READ:
Read metadata set to the SD Memory Card
with the camera.
�
Up to 8 metadata files stored on the SD
Memory Card (MTDT00 to MTDT07)
are displayed in a list. Files with no
corresponding data are displayed in gray.
�
When you touch the file you want to read,
a confirmation message appears. Touch
YES to read the metadata.
META DATA REC:
Select this to set whether to record the
metadata to be loaded into the unit
simultaneously on the SD Memory Card. Touch
ON to set metadata recording.
The
icon appears on the LCD monitor.
META
The factory setting for this mode is OFF.
USER CLIP NAME:
The USER CLIP NAME recording method
is selectable. For details, see "Selecting the
USER CLIP NAME recording method".
META DATA PROP:
Select this to display metadata that has been
loaded to the unit.
CLIP COUNTER RST:
Reset the COUNT value to 1.
Touch YES to reset.
META INITIAL SET:
Select this to initialize the metadata which
has been recorded in the unit.
Touch YES to initialize.
5
Press the MENU button to release the menu
mode.
Selecting the USER CLIP NAME
recording method
You can select the recording method for USER
CLIP NAME by touching the USER CLIP NAME
item in the setting menu RECORD SETUP screen.
The TYPE1 and TYPE options are available for
selection.
USER CLIP NAME to be recorded
If clip metadata has
Uploaded
been read in
data
If no clip metadata
has been read in
Sequential 5-
or if the setting
digit number,
for recording clip
in order of
metadata has been
recording
turned off
(Continued on the next page)
TYPE1
TYPE
Uploaded data
+ COUNT
value ∗
Sequential 5-
digit number,
in order of
recording
57
Advertisement
Table of Contents
