Panasonic AVCCAM AG-HMC41E Operating Instructions Manual page 113

Memory card camera-recorder model no. ag-hmc41e
Hide thumbs Also See for AVCCAM AG-HMC41E:
Table of Contents

Advertisement

Recording
Cannot record even
through the SD Memory
Card is inserted correctly.
Recording stops by itself.
Editing
Cannot read the data on the
SD Memory Card.
Cannot perform nonlinear
editing.
Cannot dub onto an
external device.
Displays
Something is wrong with
the time code display.
Playback
Cannot play even when I
press the play button.
Mosaic-like noise appears
when I cue or review a clip.
Images do not appear on
the television even though
I have connected the
camera-recorder properly.
Cannot hear any sound
from the camera-recorder's
speaker.
Is the write-protect switch on the SD Memory Card in the "LOCK"
position? The card cannot be recorded to if the switch is in the
"LOCK" position.
Is the remaining memory available on the SD Memory Card
extremely low? Please save contents onto different media and
delete unneeded data from the card, or use a new card instead.
Has the SD Memory Card been correctly formatted? Alternatively, is
the card of a format that is incompatible with this camera? Reformat
the card with the camera.
8 MB – 16 MB SD Memory Cards cannot be used for video
recording.
Is your SD Memory Card compatible with use for video recording?
Always use an SD Memory Card compatible with use for video
recording.
Make sure the SD Memory Card is formatted correctly.
If it is not, format the card in the unit.
Check the specifications of your computer and connecting cable.
Make sure the external device is connected correctly.
The time code display may not register a regular count if a clip is
played in the reverse slow mode. This is normal.
Make sure the PB lamp is on.
Lower the POWER switch to turn the PB lamp on.
Is the playback format correct?
Make sure the playback format on the camera matches the
recording format for the clip.
This noise is inherent to digital video technology. This is normal.
Make sure the input selector on your television is set to video input.
Read the television's instructions carefully and select the correct
video input connector for the camera-recorder.
You may have turned down the camera-recorder's volume control
too far.
Adjust the volume using the + zoom button.
P37
P35
P1
P1
P35
P85
P83
P70
P73
P71
(Continued on the next page)
113

Advertisement

Table of Contents
loading

Table of Contents