Table of Contents
Advertisement
During self-portrait recording
1 Time code display ∗
Each time you press the COUNTER button, the
display switches over to the following data (or
no indication).
COUNTER:
Counter value
CLIP:
Counter value for each recorded clip
Displayed when the REC COUNTER item in
the setting menu SW&DISP SETUP screen
is set to CLIP.
During playback, the time code display
automatically changes to CLIP and counts
each clip from 0:00:00.
TC:
Time code value.
When the time code value could not be read
correctly from the SD Memory Card, [TC∗] is
displayed.
UB:
User information
When user information could not be read
correctly from the SD Memory Card, [UB∗] is
displayed.
2 AUTO/MANUAL switch operation display
This display appears when AUTO/MANUAL
switch is switched to AUTO.
A
: Auto shooting
: Auto face detection shooting
A
ON
∗ 1 Will not be output to external devices.
5
1
4
7
3 Recording function display
PRE-REC : Displayed when PREREC MODE is set
to ON. (Page 46)
:
Displayed when INTERVAL REC is
enabled. (Page 48)
:
Displayed when REPEAT PLAY is set to
ON. (Page 73)
4 Shutter chance display (Page 61)
5 Operation status display
●
:
Recording
:
(Green) Recording standby
:
Playback or REC CHECK in
progress
:
(White) Playback paused
(
): Frame-by-frame playback
(Frame-by-frame reverse
playback)
(
): Fast forward/fast playback
(Rewind/fast reverse playback)
Self-portrait recording display
No display: Cannot record (no card, etc.)
●
:
Recording in progress, transitioning to
recording standby mode
: (Green) Recording standby mode
: Warning display
6 Touch auto focus display
Displayed when touch auto focus is set to ON
in the Function Navi.
28
41
(Continued on the next page)
87
Advertisement
Table of Contents
