Switch Network Modes; Data Usage - Boost N9510 User Manual

Boost warp 4g
Table of Contents

Advertisement

it is functioning properly. Allow your phone some time to process your data usage
request.

Switch Network Modes

1. Touch
1. Select one of the following options: LTE/CDMA or CDMA.

Data Usage

Data usage settings help you control your phone's mobile data. You can turn on or off mobile
data, set mobile data limit, see your data usage in graphs, and more.
Important Note:
your device. Please check with your carrier for determination of exact data usage.
To turn Mobile data on or off:
► Touch
– or –
Touch
enabled check box.
To set mobile data limit:
1. Touch
box.
2. Touch OK.
3. Touch the time cycle in Data Usage Monitor to change when the data limit is applied.
4. Slide the red bar in the diagram up or down to adjust the data limit.
5. Slide the orange bar in the diagram up or down to adjust data warning. You will receive a
warning in the status bar when the warning threshold is reached.
To see what apps have been using mobile data and set restriction:
1. Touch
2. Slide the tabs at the bottom of the data usage diagram to select a time period.
A list of apps that used mobile data during the time period appears under the diagram.
You can also see how much data each app used.
Settings
>
> Settings > Mobile networks > Network Mode.
Your carrier may measure data usage differently from what's shown on
>
> Settings > Data usage and touch the ON/OFF switch.
>
> Settings > More... > Mobile networks and touch the Data
>
> Settings > Data usage and tick the Set mobile data limit check
>
> Settings > Data usage.
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Boost warp 4g n9510

Table of Contents