Start Playback - Kenwood CORE-A55 Instruction Manual

1
Turn the system ON.
Press [VOLUME].
Press [K].
To turn the system OFF:
Press and hold [VOLUME] for more than
a second.
Press [K].
2
Load the audio source medium.
How to load an SD card
Insert the SD card into the SD card slot until it
clicks.
Insert the SD card so that the label side faces up
and the side with a cut comes on the right.
■ To remove the SD card:
After playback has stopped, turn the system to
standby mode and push the SD card with your
fi nger. When the card pops out, it can be pulled
out.
■
To use a mini SD or micro SD card:
Attach the card to a special adapter (commercially
●
available) and insert it. The adapter is inserted in the
same orientation as the SD card.
microSD card
adapter
microSD card
How to connect a USB device
Hold the device in the correct orientation and
insert the connector all the way. (page 10)
■
To disconnect the USB device:
After stopping, set the system to the standby
mode and pull out the USB device.
3
Select the audio source.
Rotate [JOG].
Press [INPUT SELECTORA/B].
D.AUDIO/PORTABLE
D-IN
SD
USB
PC
AUX
■
Selecting the audio source (Main unit)
Confi rm that the illumination is white and rotate
[JOG] to select an audio source (input source).
4

Start playback.

Press [VOLUME].
Press [E].
* The settings change according to the connected
●
component. When D.AUDIO Control is set to "OFF", the
input selection display changes to "PORTABLE". (page
32)
External component
connected to D.AUDIO/
*
PORTABLE IN
External component
connected to D-IN(PCM)
SD card inserted in the SD
card slot
Component connected to
USB
PC connected to PC IN
External component
connected to AUX IN
English
17