System Setup; Adjusting The Time (Time Adjust) - Kenwood K-323 Instruction Manual

System Setup

Adjusting the Time
(TIME ADJUST)
The day of the week and the time of the day of the
system can be set.
1
Enter the setup mode.
Press [MODE].
2
Select "TIME ADJUST".
Press [G]/[H] to select,
then press [ENTER].
3
Set the day of the week, hour and
minute.
Adjust the day of the week, the hour,
then the minute.
Press [G]/[H] to select,
then press [ENTER].
4
Enter the selection.
Press [ENTER].
When the setting completes, "COMPLETE" is
displayed and the unit exits the setup mode
automatically.
K-323
■
To display time of day when the system is OFF
(standby mode):
Press [F]/[STOPF]
The time of the day is displayed for 5 seconds.
• If the power cord is unplugged then plugged in or
after a power failure, adjust the time of the day again.
• The clock operation involves a certain error. It
is recommended to adjust the time of the day
periodically.
32