Connections - Kenwood K-323 Instruction Manual

Connections

Basic connections
Caution for connection
Connecting the AM loop antenna
The provided AM antenna is an indoor antenna. Install it as apart as possible from the main unit, TV set, speaker cords
and power cord and orient it in the direction that off ers best reception condition.
• Connecting an antenna cord
Connect the AM antenna code across the [AM] and
[MGND] terminals as shown on the right.
Connecting the FM indoor antenna
The provided FM antenna is a simplifi ed one for indoor use. To receive FM stations stably, it is recommended to use an
outdoor antenna (commercially available). Remove the simplifi ed antenna before connecting the outdoor antenna.
Caution for outdoor antenna installation
Do not plug the power cord into the power outlet until all other connections are
completed. Before unplugging a connected cord or cable, be sure to switch the system
OFF and unplug the power cord from the power outlet in advance.
Since antenna installation necessitates skill and experience, always
consult your dealer before installation. The antenna should be
placed at a distance from the power distribution wires. Otherwise, an
electric shock accident may occur if the antenna falls down.
9
AM loop antenna
Fit into the groove.
FM indoor antenna
1 Connect to the [FM75Ω] terminal.
2 Find the antenna location that off ers
best reception.
3 Fix the antenna in the found location.
Two types of power cords are provided.
Select the one designed for the country
in which this unit is used.
To AC wall outlet
• Insert the plug firmly all the way
into the AC wall outlet.
Power cord
English