Table of Contents
Advertisement
When the floor is
not leveled
When the fridge
door is lower than
the freezer door
(Applicable to
some models only)
CAUTION
After leveling the
door height
Next
Height adjustment
- When the height of the door may not be
leveled when the floor is not leveled.
When the freezer door is lower –
Use the (-) driver or spanner to turn the
groove or nut of the height adjustment
screw on the left to the counterclockwise
direction to level the door.
When the fridge door is lower –
Use the (-) driver or spanner to turn the
groove or nut of the height adjustment
screw on the right to the clockwise
direction to level the door.
When the fridge door is lower than the freezer door while using the
refrigerator, level the doors.
1. Use the
tool for adjustment on
the wide side to turn nut
in the clockwise direction to loosen
the keeper nut.
2. Use the
tool for adjustment on
the narrow side to turn the
adjustment hinge pin
(
)clockwise direction or
(
) counterclockwise direction
to adjust the height of the fridge
and freezer doors.
3. After aligning the height of the door, turn the keeper nut in counterclockwise
direction tightly.
Do not force too hard to level the height. The hinge pin can be pulled out.
(Adjustable range of height is a maximum of 2" (5 cm))
The refrigerator doors will close smoothly by heightening the front side by adjusting
the height adjusting screw. If the doors do not close correctly, performance may be
affected.
1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly.
2. Install accessories such as the ice cube box, cover evaporating tray, etc., in their
proper places. They are packed together to prevent possible damage during shipping.
3. Connect the power supply cord (or plug) to the outlet. Don't double up with other
appliances on the same outlet.
14
(
)
in
Installation
Advertisement
Table of Contents
