How To Use; Control Panel Features - Kenmore 796.8885 Series Use & Care Manual And Installation Instructions

WARNING:
manual, including the Important Safety Instructions, before operating this dryer.

CONTROL PANEL FEATURES

A
POWER (On/Off) BUTTON
Press to turn the dryer ON. Press again to turn
the dryer OFF.
NOTE: Pressing the Power button during a
cycle will cancel that cycle and any load settings
B
CYCLE SELECTOR KNOB-START/PAUSE
This knob is a dual function knob that is used both to
select a cycle and to start or pause a cycle. Turn this
knob to select the desired cycle. Once the desired
cycle has been selected, the standard presets will be
shown in the display. These settings can be adjusted
using the Cycle Modifier or Option buttons anytime
before starting the cycle. (See the cycle guide on
page 19 for allowable settings. To protect your
fabrics, not all settings are allowed in all cycles.)
Press this knob to START the selected cycle. If the
dryer is running, use this knob to PAUSE the cycle
without losing the current settings.
NOTE: If the dryer is stopped more than 4 minutes,
the dryer will automatically turn off.
C
OPTION BUTTONS
The option buttons allow you to select additional
cycle options. Certain buttons also allow you to
activate special functions by pressing and holding
the button for 3 seconds.
MORE TIME and LESS TIME options are not
available with sensor dry cycles.
For detailed information about the individual options,
please see the following pages.

HOW TO USE

To reduce the risk of fire, electric shock, or injury to persons, read this entire
C
A D E
G
F H
D
MY CYCLE BUTTON
Press the MY CYCLE button to select the memorized
cycle. Cycle selections and settings are memorized
by pressing and holding the button for 3 seconds.
(See page 23.)
E
RACK DRY BUTTON
The RACK DRY button selects preset temperature
and time settings to rack dry items.
F
CYCLE MODIFIER BUTTONS
Use these buttons to adjust the desired cycle options
for the selected cycle. The lights above the buttons
show the current selection. See page 22 for a
complete discription (NOTE: Some settings are
not allowed on some cycles.).
G
TIME AND STATUS DISPLAY
The display shows the estimated time remaining and
the cycle status. The display also monitors the vent
and lint screen status. See page 21 for a complete
description.
H
CANCEL/CYCLE BUTTON
The CANCEL/CYCLE button is used to stop the dryer
and reset the controls.
17
B