Setting Up Wifi Connection For Wps-Compatible Computers - Comcast Xfinity User Manual

Internet and voice wireless gateway
Hide thumbs Also See for Xfinity:
Table of Contents

Advertisement

S
W
F
ETTING UP
I
• WPS (WiFi Protected Setup) lets you easily set up secure WiFi networks without entering a Network Key.
• Most WPS-compatible devices will work with your Internet and Voice Wireless Gateway. You can easily
connect to your WiFi Network using either the default Push Button Configuration (PBC) or the Personal
Identification Network (PIN) method. Both methods are described below.
• If you aren't sure if your computer supports WPS, look for a WPS sticker or label
(Fig.1) on your computer or device. If none is found, your computer is probably NOT
compatible with WPS. In this case, follow the steps under WiFi Connection.
WPS via PBC Connectivity/One Button Connectivity (Recommended)
1. Press the WPS button on your computer or wireless device. (If your
computer doesn't have a physical button, refer to your computer's user guide
to enable WPS.)
2. Within 2 minutes, press the WPS button on the top of your
Internet and Voice Wireless Gateway. (Fig. 2)
3. After a message displays that the connection was successful, your
computer/device is connected to your home network.
Note: When the WPS button is pressed, it will stay lit for 5 minutes
(regardless of whether or not the connection was successful).
Please wait until the light turns off before retrying or connecting another
WPS device.
WPS via PIN Connectivity
1. Open your computer's WPS utility and acquire a PIN number. Make a note of the PIN number. The WPS
utility will begin its countdown to 2 minutes.
2. Launch your web browser and type http://10.0.0.1 in the address line.
3. Log in using admin as the username and the password you created in the Home Network Wizard.
4. Select Gateway > Connection > WiFi.
5. Before the WPS Utility finishes its countdown, enter the PIN number from Step 1 above in the
Enter Wireless Client's PIN field.
6. Click PAIR WITH MY WIFI CLIENT.
7. Your computer will communicate with your Internet and Voice Wireless Gateway and establish a
connection.
Note: If your WPS client prompts you to enter the Internet and Voice Wireless Gateway's PIN during the
WPS Connection, enter the WPN printed on the label on the underside of your Wireless
Gateway.
Internet and Voice Wireless Gateway User Guide
C
I
ONNECTION FOR
WPS-C
OMPATIBLE
C
OMPUTERS
Fig. 1
Fig. 2
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents