JVC XM-PX50WT Service Manual page 9

Removing the feed motor (See Fig.14)
1. Peel off the adhesive tape j on the flexible wire on
the underside of the feed motor.
2.
Unsolder soldering k connecting the flexible wire to
the feed motor.
3. Remove the two screws L attaching the feed motor.
ATTENTION: When reassembling, reattach the
flexible wire with an adhesive tape and
solder.
L
j
Feed motor
Chassis assembly
Fig.14
XM-PX50WT
Soldering k
L
Pickup unit
1-9