Table of Contents
Advertisement
Disassembly method
Removing the MD door assembly
1.
Shift the door lever to open the door.
2.
Remove the four screws A and detach the MD
assembly from the main body.
Removing the holder assembly
Prior to performing the following procedure, remove
the MD door assembly.
1.
Turn the Holder assembly as shown in Fig.3.
2.
Pull the side arm (L) marked a and
Open the Holder assembly as
3.
Move the "U-shaped" notch marked b in the direction
of the arrow and release it from the shaft.
4.
Move the part c inward and pull out the Holder
assembly from the shaft.
ATTENTION:
When reassembling, first reattach the
part c to the shaft of the Chassis
assembly. And next, fit the "U-shaped"
notch to the shaft.
"U-shaped" notch
(See Fig.1 and 2)
(See Fig.3 and 4)
remove outward.
shown in Fig.4.
assembly
Holder
Holder
Part b
MD door assembly
door
A
Door lever
Holder
assembly
Part c
Fig.4
Door lever
Fig.1
MD door assembly
Fig.2
assembly
Side arm (L)
Fig.3
assembly
Holder
Part c Shaft
XM-PX50WT
A
Part a
1-5
Advertisement
Chapters
Table of Contents
