Technical Specifications - HP P1100 User Manual

PICTURE TUBE
INPUT SIGNAL
INTERFACE
SCANNING FREQUENCY
MAX. RESOLUTION (H
WARM-UP TIME
PIXEL CLOCK
IMAGE SIZE
POWER SOURCE
OPERATING ENVIRONMENT
CABINET DIMENSIONS
WEIGHT
TILT/SWIVEL STAND
1. Use the standard image sizes to avoid distortion of the displayed image.

Technical Specifications

Size
Phosphorous
Dot pitch
Face Plate
Video
Synchronization
Input Connector
Horizontal
Vertical
1600 1200 (85 Hz)
V)
30 minutes to reach optimum performance level
230 MHz
At 1280 1024
1
Standard size : 364(H) x 291(V) mm
Maximum size: 403(H) x 302(V) mm
AC 90 to 264 V, 47 to 63 Hz, 160 W (max), less than 15 W in Standby mode, less than 5 W in Sleep mode,
less than 1 W when switched off.
Temperature
Operating Humidity
504(H) 498(W) 474(D) mm (with stand)
31 kg
Tilt Angle
Swivel Angle
HP P1100 Monitor User's Guide
21-inch Trinitron® / 19.8-inch viewable image
Red, Green, Blue short persistence
0.25-0.27 mm stripe pitch
Anti-glare, anti-static coating
0.7 Vp p analog RGB
Separated H/V (TTL level), H/V mixed (TTL level),
Sync-on-green
15-pin mini D-SUB; EVC
30 to 107 kHz
50 to 160 Hz
At other resolutions
1
Standard size : 388(H) x 291(V) mm
Maximum size: 403(H) x 302(V) mm
5 C to 40 C (operating)
- 40 C to +60 C (storage)
10% RH through 80% RH (without condensation)
- 5 to +15
90
Technical Specifications
English 17