HP P1100 User Manual page 13

NOTE
Advanced Configuration
These controls are for advanced users who want to optimize the purity
of the displayed image. Unnecessary adjustment of these controls may
adversely affect the overall performance of the display. Remember that
you can restore the factory settings at any time — refer to "Resetting
Individual Settings" above.
Convergence
Use this control if you see fringing in the displayed image.
That is when areas in the displayed image — more noticeably dark
areas — appear to have fringes of color round their edges.
You can adjust the horizontal and vertical convergence over the whole
screen. You can also adjust separately the vertical convergence settings
for the top and the bottom portions of the screen.
Select from the main menu. You will see one icon like this
and three icons like this
want to change, and use
the horizontal and vertical convergence settings before adjusting the
individual settings for the top and bottom portions of the screen.
Landing
Use this control to correct variations in color temperature over
the displayed image. You can adjust separately the beam landing in
each corner of the screen.
Select from the main menu. You will see two icons like
this: . Highlight the upper icon and then use
the corner of the screen you wish to make an adjustment for. Then
press to highlight the lower icon, and use
Setting the Preferences of Your Display
Setting the Language of the On-Screen Menus
Select from the main menu. Use
you want.
. Highlight the convergence setting you
and to adjust. For best results, adjust
and
HP P1100 Monitor User's Guide
Using Your Display
and to select
and to adjust.
to select the language
English 11