Meridian DSP8000 User Manual page 18

14
Setting up
the DSP8000
loudspeakers
To connect to a Meridian product with BNC Comms
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
If the Meridian source or control unit provides a
Meridian BNC Comms output, you will need to connect
it to the DSP loudspeakers using a Digital/BNC lead.
• Connect the DIGITAL OUTPUT and the BNC
COMMS socket from the Meridian source or control
unit to the DIGITAL INPUT and COMMS INPUT on
the DSP8000 chosen as the master, using a
Digital/BNC lead.
G Series CD Player or Control Unit
DIGITAL OUTPUT
Front R – Slave
MERIDIAN DIGITAL
COMMS
INPUT OUTPUT INPUT OUTPUT
RJ45 lead
BNC COMMS
Digital/BNC lead
Front L – Master
MERIDIAN MERIDIAN
SPEAKERLINK COMMS
INPUT OUTPUT INPUT OUTPUT
• Connect the MERIDIAN SPEAKERLINK OUTPUT
from the master DSP8000 to the SpeakerLink input
on the other (slave) DSP8000, using a SpeakerLink
lead.
Configure the master DSP8000 as M.Coax and the
•
slave DSP8000 as S.RJ45; see To choose master or
slave and the primary connector , page 24.
DIGITAL
INPUT OUTPUT