Related Manuals for Maytag MDG9206BWW
Summary of Contents for Maytag MDG9206BWW
- Page 1 AUTOMATIC DRYER INSTALLATION INSTRUCTIONS The installation, including a proper exhaust system, is the responsibility of the owner. LEAVE THESE INSTRUCTIONS WITH THE OWNER 6 3716990 Printed in U.S.A.
-
Page 2: Location Considerations
Read this before you start... ITEMS PROVIDED Tools needed installation ®®o gQ • Teflon tape or pipe joint compound (gas only) ® %d\@ @ • Cutting knife • Pipe wrench (gas only) Electric Dryer Gas Dryer • Nut drivers Only Only •... -
Page 3: Installations
If exhaust ductwork must run through an unheated Exhaust Hood Type area, the duct should be insulated and slope slightly down towards the exhaust hood to reduce conden- Number sation and lint build-up. If an existing exhaust system is to be used with 90°... -
Page 4: Gas/Electrical Requirements
ACCESSORIES If your dryer requires replacement parts or accessories, contact the dealer from whom you purchased your dryer or Maytag Customer Service, Box 2370, Cleveland, Tennessee 37320-2370, phone 423-472-3333, information on the nearest authorized Maytag... -
Page 5: Installation
INS TALLA TION Parts and literature are packaged inside of dryer drum. To Install... • Improper connection of the equipment-grc [-_WARNING I in doubt as to whether the appliance is pr outlet installed by a qualified electrician. Move dryer to an appropriate location •... - Page 6 unding conductor can result in a risk of electrical shock. Check with a qualified electrician or serviceman if you are )perly grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper cat shock or personal injury, all wiring and grounding must be done in accordance...
- Page 7 Check with your local Association for the Blind for information on Braille label makers. (not U.S. or Canada) Contact the distributor that sold the appliance or: Maytag International, 8700 W. Bryn Mawr Avenue, Chicago, Illinois USA 60631, 773-714-0100, for information...