Table of Contents
Advertisement
What can be done?
When the optional network connection is installed, the projector can be connected to a LAN (local area network) (Ethernet). Once
installed and connected to the LAN, users are capable of accessing the projector from any location, inside or outside their company
network from a standard web browser. The projector acts as web server and generates a web site with all functions of the projector
listed. Via an internet explorer 4.0 or higher, or a Netscape communicator, the user can insert the correct IP-address of the projector
and access the webpages. Once the web site is accessed, it is possible to check and manipulate all the projector settings. Remote
diagnostics, control and monitoring of the projector can then become a daily and very simple operation. The network connectivity
permits to detect potential errors and consequently improve the time to servicing.
Two way
Hardwired
hardwired
remote
remote
CTRL 2
CTRL 3
On
R
G
On
High Bandwidth 5 CABLE INPUT
R
G
On
High Bandwidth 5 CABLE INPUT
Image 4-8
Always use an Ethernet cable with ferrite core to connect the projector to the LAN.
R5976654 SLM R12+ 09022004
Diagnostic Code
Green Operation
Red Stand-by
Sync OK
IR
Hardwired
remote
RS232/422 IN
RS232/422 OUT
CTRL 1
OUT
IN
On
SDI DIGITAL INPUT
H/C
V
B
On
DVI INPUT
B
H/C
V
On
DVI INPUT
Ethernet
connection
IR-Receiver
COMM PORT
TRIGGER OUT
IN
OUT
HD SDI DIGITAL MODULE
DVI OUTPUT
4. Connections
33
Advertisement
Table of Contents
