Table of Contents
Advertisement
Setting the Date Stamp
The date of recording can be printed directly on the still images. This function must be activated before the image is
captured. Once date and time are stamped on a photo, they can no longer be edited or deleted.
Limitations of Date Stamp functions are as follows:
•
Available for Photos only.
•
May slow down AEB/ Burst mode when Date Stamp is enabled in AEB/ Burst mode.
•
In vertical or rotated images, the date and time on your photos still appear horizontally.
To set Date Stamp
1.
From the Record menu, select
2.
Use the
or
keys to go through the selection.
OK button
3.
Press the
Setting Auto Review
The Auto Review function lets you view the captured image
right after shooting it.
If Auto review is On, the camera will display the captured
image for 1 second on the LCD monitor.
To set Auto Review
1.
From the Record menu, select
2.
Use the
or
keys to go through the selection.
3.
Press the
OK button
Recording Videos
Record videos with the camera, the available recording time depends on the capacity of the memory card. Videos can
be recorded until the maximum memory capacity has been reached. However the length of a single video may be
limited (the limitation depends on the camera model).
Mode switch to Video mode
1.
Slide the
2.
Focus your camera on the subject that you want to take.
3.
Press the
Shutter button
Zoom Toggle
4.
Us the
recording."
5.
To pause recording, press the key
6.
To continue recording, press the key
7.
To stop recording, press the
Date Stamp.
to save and apply changes.
Auto Review.
to save and apply changes.
.
to start recording.
to zoom in and out during
.
again.
Shutter button
.
44
Advertisement
Table of Contents
