Setting The Date Stamp; Setting Auto Review; Setting Stabilizer - HP d3000 User Manual

Setting the Date Stamp

The date of recording can be printed directly on the still
images. This function must be activated before the image
is captured. Once date and time are stamped on an image,
they can no longer be edited or deleted.
Limitations of Date Stamp functions are as follows:
Available for still images only.
•
May slow down AEB/ Burst mode when Date Stamp
•
is enabled in AEB/ Burst mode.
In vertical or rotated images, the date and time on
•
your images still appear horizontally.
To set Date Stamp
1. From the Record menu, select Date Stamp.
2. Use the or
3. Press the OK button to save and apply changes.

Setting Auto Review

The Auto Review function lets you view the captured
image right after shooting it.
If Auto review is On, the camera will display the captured
image for 1 second on the LCD monitor.
To set Auto Review
1. From the Record menu, select Auto Review.
2. Use the or
3. Press the OK button to save and apply changes.

Setting Stabilizer

This function allows you to prevent blurred images caused
by shaking.
1. Enable the Stabilizer under the Record Menu.
2. Use the or
3. Press the OK button to save and apply changes.
keys to go through the selection.
keys to go through the selection.
keys to go through the selection.
42