Setting The Digital Zoom; Setting The Date Stamp - HP s500 User Manual

Setting the Digital Zoom

This feature controls the digital zoom mode of your camera.
Your camera enlarges an image using the optical zoom first.
When the zoom scale exceeds 5x, the camera uses digital
zoom.
To set Digital Zoom
1. From the Record menu, select
2. Use the or keys to go through the selection.
3. Press the OK button
The table below shows the available Digital Zoom settings.
Icon Item
Intelligent
Zoom
Standard Zoom
Off
• Digital Zoom is not available in Smile Capture, Movie, and Voice Recording modes.
• The maximum Intellect zoom scale varies depending on the image type and
resolution.

Setting the Date Stamp

The date of recording can be printed directly on the still images. This function must be activated before the image is
captured. Once date and time are stamped on a photo, they can no longer be edited or deleted.
Limitations of Date Stamp functions are as follows:
• Available for Photos only.
• May slow down AEB/ Burst mode when Date Stamp is enabled in AEB/ Burst mode.
• In vertical or rotated images, the date and time on your photos still appear horizontally.
To set Date Stamp
1. From the Record menu, select
2. Use the or keys to go through the selection.
OK button
3. Press the
Digital Zoom.
to save and apply changes.
Description
Enlarges the image digitally with almost no distortion. This feature is available
for still images only.
Will not enlarge image past the point of distortion.
Enlarges all image sizes up to a maximum of 5x in playback, but the image
quality deteriorates.
Uses the optical zoom only.
Date Stamp.
to save and apply changes.
47