Connecting With A Component Cable - LG LCD TV / LED LCD TV Owner's Manual

EXTERNAL EQUIPMENT SETUP
■ To avoid damaging any equipment, never plug in any power cord until you have finished connecting
all equipment.
■ This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the
32/42/46/52/60LD55* models.
■ Image shown may differ from your TV.

CONNECTING WITH A COMPONENT CABLE

■ This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you
do receive Digital signals from a digital set-top box or other digital external device, refer to the dia-
gram as shown below.
1
Connect the video outputs ( Y, P
the COMPONENT IN VIDEO jacks on the TV.
Connect the audio output of the external equipment (digital set-top box, DVD, etc.) to the
2
COMPONENT IN AUDIO jacks on the TV.
Turn on the external equipment.
3
( Refer to the external equipment's manual for operating instructions.)
Select the Component1 input source using the INPUT button on the remote control.
4
If connected to COMPONENT IN2 or COMPONENT IN3, select Component2 or Component3
OPTICAL
DIGITAL
input source.
AUDIO OUT
VIDEO
RGB IN (PC)
WIRELESS VIDEO
AUDIO IN
/DVI IN
CONTROL (RGB/DVI)
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
2
B
RS-232C IN
(CONTROL&SERVICE)
AV IN1
L/MONO AUDIO R
2
1
AUDIO
ANTENNA/
COMPONENT IN COMPONENT IN
CABLE IN
or
1 2
Y
Y
Y
Y
Y
RS-232C IN
) of the external equipment (digital set-top box, DVD, etc.) to
, P
R
2
1
P P
B R
P P
B R
B-Y R-Y
Cb Cr
Pb Pr
OPTICAL
DIGITAL
AUDIO OUT
VIDEO
RGB IN (PC)
VIDEO
WIRELESS
AUDIO IN
/DVI IN
CONTROL (RGB/DVI)
1
2
RS-232C IN
RS-232C IN
(CONTROL&SERVICE)
AV IN1
L/MONO
AUDIO R
2
1
AUDIO
ANTENNA/
COMPONENT IN
CABLE IN