Wireless Network Setup; Network Setting - LG LCD TV / LED LCD TV Owner's Manual

Wireless Network Setup

Setting up the AP (Access Point) or the wireless router is required before connecting the TV to the network.
NETWORK
Move OK
• Network Setting : Wired
• Network Setting : Wired
Network Type
• Network Status : Internet is connected
Wired network is recommended
• Legal Notice

Network Setting

Select the IP setting mode.
◄ IP Auto Setting ►
IP Mode
●
IP Address 255 . 255 . 0 . 0
●
Subnet Mask 255 . 255 . 0 . 0
●
Gateway 255 . 255 . 0 . 0
●
DNS Server 255 . 255 . 0 . 0
OK
Exit
Previous
1
Select NETWORK.
2
Select Network Setting.
3
Select Wireless.
4
If you already set Network Setting:
Select Resetting.
The new connection settings resets
the current network settings.
5
Select Setting from the AP list.
If you already set the
Network Setting
Previous setting value exists. Do
Wired
you want to connect with the
Wireless
previous setting?
Appeared when
wired and wireless
ꔉ Next
are simultaneously
connected.
If your AP is locked
Inserting the security key
Insert the security key of AP.
Insert 8~63 ASCII characters
OK Cancel
Prev.
Select the wireless network setting type.
OK
Resetting
Exit
Selecting AP
Select AP you want to connect.
Input the new SSID
◄ ►
iptime
ASW
Network1
Connecting with PIN mode
Exit
Previous
Scan the all available AP (Access
6
Point) or wireless routers within range
and display them as a list.
Select an AP (Access Point) or
7
wireless router on the list.
(If your AP is locked, insert the
security key of AP).
8
Input the security key of AP.
9 Repeat step 4-5 on P.17.
Select the wireless network setting type
Setting from the AP list
Simple setting (WPS-button mode)
Setting Ad-hoc network
ꔉ Next
Previous Exit
Page 1/1
Access Point
Search
ꔉ Next
Exit
21