To avoid damaging any equipment, never plug in any power cords until you have finished connecting
all equipment.
The image shown may be somewhat different from your set.
HD RECEIVER SETUP
Connecting with a component cable
Connect the video outputs (Y, PB, PR) of the digital
1
set-top box to the COMPONENT IN VIDEO jacks on
the SET.
Connect the audio output of the digital set-top box
2
to the COMPONENT IN AUDIO jacks on the SET.
3
Turn on the digital set-top box.
(Refer to the owner's manual for the digital set-top
box.)
4
Select COMPONENT input source using the INPUT
button on the remote control
HDMI Audio Supported format : Dolby Digital, PCM
DTS Audio format is not supported.
Signal
480i / 576i
480p / 576p
720p / 1080i
1080p
(50 Hz / 60Hz only)
Component
YES
YES
YES
YES
(24 Hz / 30 Hz / 50Hz / 60Hz)
1
HDMI
No
YES
YES
YES
2