PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats; 16:9, Just Scan,
Original, Full Wide, 4:3, 14:9, Zoom and Cinema Zoom.
If a fixed image is displayed on the screen for a long time, that fixed
image may become imprinted on the screen and remain visible.
You can adjust the enlarge proportion using
This function works in the following signal.
1
2
• 16:9
The following selection will allow you to adjust the
picture horizontally, in linear proportion, to fill the
entire screen(useful for viewing 4:3 formatted
DVDs).
• Just Scan
Following Selection will lead to you view the
picture of best quality without loss of original
picture in high resolution image.
Note : If there is noise in original Picture, You
can see the noise at the edge.
116
Select Aspect Ratio.
Select the desired picture format.
Just Scan
button.
•
You can also adjust Aspect Ratio in the
PICTURE menu.
•
For Zoom Setting, select 14:9, Zoom and
Cinema Zoom in Ratio Menu. After com-
pleting Zoom Setting, the display goes
back to Q.Menu.
• Original
When your TV receives a wide screen signal it will
automatically change to the picture format broad-
cast.
Original
• Full Wide (Only DTV)
When TV receives the wide screen signal, it will
lead you to adjust the picture horizontally or verti-
cally, in a linear proportion, to fill the entire screen
fully.
4:3 and 14:9 video is supported in full screen with-
out any video distortion through DTV input.
Full Wide
or
Original
Full Wide
or