Radio Operation - LG LAC7750R Owner's Manual

AVRCP
Based on the GAP Profile, this uses a Controller (CT) - PDA, computer mobile phone etc.,
which sends a command to a Target (TG) - TV, discman, headphone etc. The command can
be to Play, record, colour control, volume control etc., depending on the nature of the devices
involved and the scenario. The commands are transported by a new additional protocol,
called the Audio/Video Control Transport Protocol (AVCTP). Some scenarios defined are
Remote Control from a Separate Controller, Remote Control and Audio Stream Between Two
Devices, and Remote Controller with LCD.

Radio operation

Listening to radio stations
1 Press SOURCE to select the tuner.
2 Press the BAND repeatedly to select a band.
The indicator lights up in the following order. FM1 t FM2 t FM3 t MW(AM)
3 Auto Search : Press I I
When a station is received, searching stops.
Manual Search : Press and hold I I
"MANUAL" appears, and then press it repeatedly.
The frequencies move up or down step by step.
Storing and recalling broadcast frequencies
You can easily store up to 6 broadcast frequencies for later recall at the touch of a button.
1 Press BAND to select desired band you want to store.
2 Select the desired frequency.
3 Press one of preset buttons 1~6 and hold until the beep sound.
The number you have pressed will appears the preset number on screen and then remain
lit. The selected radio station frequency has been stored in memory.
4 Repeat steps 1 ~ 3 to preset other stations.
The next time, you press the same preset button, the radio station frequency is
recalled from the memory.
Note
• Up to 18 FM stations, 6 for each of three FM bands and 6 MW(AM) stations can be stored
in the memory.
• When a station is stored on the preset numbers on which another station of the same band
has already been preset, the previously preset station is automatically erased.
Auto search memory
This function lets you automatically store the 6 strongest broadcast frequencies.
1 Press U U /AS until "AUTO STORE" appears.
The six strongest broadcast frequencies will be stored under preset button 1~6 in the
order of their signal strength.
2 To cancel, press U U /AS or u u /PS.
To scan the preset stations
Press u u /PS. Each preset station appears. To cancel, press U U /AS oru u /PS.
To tune in the preset stations
Press BAND to select the desired band and press the desired preset button 1~6.
The preset station of the preset button 1~6 is displayed and the preset station is received.
i i ( on the remote control).
/ ?m m/M M?
i i (
/ ?m m/M M?
19
on the remote control) until