Changing The General Settings - LG LAC6750R Owner's Manual

Changing the general settings

1 Press and hold MENU (MENU/SEL on remote control) to enter the menus.
2 Press U U /AS or u u /PS (U U /u u on remote control) to scroll between menus.
RDS y Display y Setup
3 Press I I or i i (
?m m/M M?
remote control)to select one of the settings specified belows.
4 Press MENU (MENU/SEL on remote control) to finish the setting.
RDS
AF(Alternative frequency)
When the reception quality drops, the tuner automatically changes to another station in the
network, broadcasting a better reception quality, using the PI and AF codes.
ON : wherever you drive, you can continue to listen to the same program without interrup-
tions.
OFF : Only station name will be displayed. In case of poor reception no alternative station
can be used.
REG (Region)
ON : The unit switches to another station, within the same network, broadcasting the same
programme when the receiving signals from the current station become weak.
OFF : The unit switches to another station, within the same network when the receiving sig-
nals from the current station become weak.(In this mode, the programme may differ from
the one currently received.)
TA (Traffic Announcement Identification
Seek : When the newly tuned station does not receive TP information for 5 seconds, the
receiver retunes to the next station which has the same PI as the last station, but has the
TP information.
Alarm : When a newly tuned station has no TP information for 5 seconds, a double bee
sound is output.
TA VOLUME
Control the volume of TA (Traffic Announcement Identification)
DPI (Programme Identification)
Sound : If the sound of a station with different PI is heard intermittently, the receiver mutes
the sound after 1 second.
Mute : If the situation described above is repeated, the receiver instantly mutes the sound.
Display
You can select various display modes. It displays the change of sound output during play.
Animation
ALL y Pinball y Dance y Space y Racing y OFF
Image
ON : Animation, Graphic EQ are displayed on screen.
OFF : Animation, Graphic EQ are not displayed on screen.
Graphic EQ
OFF y Graphic EQ 1 y Graphic EQ 2
on remote control) and Press U U /AS or u u /PS (U U /u u on
11