Basic Operation
1. Turn the unit on.
2. Select a source.
3. Adjust the volume.
Basic operation - more you can do
Mute
Press PWR/MUTE (POWER
on the remote control) to cut the sound. To
cancel it, press again.
Changing the general settings
1 Press and hold SEL/MENU (press and hold SEL/MENU on remote control) so
that one of menu items appears.
2 Press SEL/MENU (SEL/MENU on remote control) and rotate PWR. (Press
VOLUME
on the remote control.) to select one of the settings specified
belows.
- For more details about setting information, refer to page 20.
3 Press and hold SEL/MENU (SEL/MENU on remote control) to finish the set-
ting.
Using the EQ
EQ is to increase or decrease the signal strength of audio frequencies. The func-
tion helps you to enjoy sound more plentifully. Press EQ/XDSS+/BRB repeatedly.
The screen lights up in the following order.
Pop t Classic t Rock t Jazz t Vocal t Salsa t Samba t User1 t
User2 t Off
Note
When XDSS+/BRB is set to "Off", you can adjust the EQ settings.
Adjusting the sound level
Press SEL/MENU (SEL/MENU on the remote control) repeatedly to select the
mode you want to adjust from volume, balance, fadar and Sub-woofer(optional).
To adjust sound quality, rotate PWR.
10
CAR CD/MP3/WMA Receiver
ON PLAYER
ON REMOTE
PWR/MUTE
POWER
SRC
SRC
Rotate PWR
VOLUME
Note
When EQ, BRB and XDSS+ is set to "Off", you can adjust the sound level
(BAS, MID, TRB) settings.
XDSS+/BRB
Press and hold EQ/XDSS+/BRB repeatedly to select the modes you want.
XDSS+ : (Improves the treble, bass sound.)
BRB : (Bass Reverb Blaster) press EQ/XDSS+/BRB to select the sub BRB
TBB (Turbo-Bass Blaster) : Improve the bass sound to make it spectacular.
3D (3D-TremD Blaster) : Positions audio effects real time in 3D space.
SBB (Sound field Boost Blaster) : Extremely wide stereo imaging and
improved low frequency bass.
Checking the clock
You can see the clock pressing DISP (DISP. on the remote control).