Basic Operation; Mute; Changing The General Settings; Using The Eq - LG LAC2800P Quick Start Manual

Basic Operation

1. Turn the unit on.
2. Select a source.
3. Adjust the volume.
Basic operation - more you can do

Mute

Press PWR/MUTE to cut the sound. To cancel it, press again.

Changing the general settings

1 Press MENU so that one of menu items appears.
2 Press MENU and press + or - to select one of the settings specified belows.
3 Press and hold MENU finish the setting.
AUX (Auxiliary) ON / OFF
It is possible to use auxiliary equipment with this unit. Activate the auxiliary
setting when using auxiliary equipment connected to this unit.
AUX (Auxiliary) 00dB / +6dB
You can adjust the volume level of each source to prevent radical changes
in volume when switching between sources.
You can set to 0 dB or +6 dB. You may be surprised at a loud sound when
you change the source from the external component to another source.
DEMO OFF/ ON
You can change the initial indication on the display to information name
(function name, EQ name, etc...) while listen to a source.
BEEP 2ND / ALL
BEEP 2ND : The beep is generated when a key is long pressed. (1 sec)
BEEP ALL : The beep is generated when any key is pressed.
8 CAR CD/MP3/WMA Receiver

Using the EQ

ON PLAYER
EQ is to increase or decrease the signal strength of audio frequencies. The func-
PWR/MUTE
tion helps you to enjoy sound more plentifully. Press XDSS/EQ repeatedly. The
indicator lights up in the following order.
SRC
POP t CLASSIC t ROCK t OFF(Not displayed.)
VOLUME + or -
Note
When XDSS+ is set to "Off", you can adjust the EQ settings.

Adjusting the sound level

Press SEL repeatedly to select the mode you want to adjust from volume, bal-
ance and fader.
Note
When EQ and XDSS+ is set to "Off", you can adjust the sound level (BAS,
TRB) settings.
XDSS+ (Extreme Dynamic Sound System)
Press and hold XDSS/EQ for more 2 seconds. (XDSS+ : Improves the treble,
bass sound.)

Checking the clock

You can see the clock pressing DISP.

Setting the clock

1 Press the DISP and then, press and hold DISP for more 1 second.
2 Press the < to adjust the hour.
3 Press the > to adjust the minute.