H
ow to use washer
Child lock
If you choose to lock the buttons on the
control assembly to prevent tampering, this
function may be selected.
1. Child lock
• Child lock can be set by pressing and holding the
Option and Rinse button simultaneously.
(About three seconds)
• When child lock is set, all buttons are inoperable.
• To deactivate Child lock system, press and hold the
Option and Rinse button simultaneously again.
(About three seconds)
• To change to the desired program, whilst in child
lock mode.
1. Press and hold both Option and Rinse button
together once again.
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
• The child lock can be set at any time and it is
automatically canceled when operational errors
occur. Also Child lock works when power is off.
Rinse
• By pressing the Rinse
button, the Rinse type can
be selected.
- Normal
- Rinse +
- Rinse ++
- Normal+Hold
- Rinse + +Hold
1. Normal
• Cotton / Cotton-Eco / Synthetic performs 3
Rinses
• Wool/Silk / Hand Wash /Quick 30 / Delicate /
Duvet performs 2 Rinses
2. Rinse + & Rinse ++
• Used to additional rinse, which may assist
in removing traces of detergent residue.
• By selecting Rinse + or Rinse ++ function,
the Rinse Time and the Rinse water are
increased.
3. Rinse Hold
• Is selected by pressing the Rinse button
repeatedly this function leaves clothes in the
washer; suspended in the water after a rinse
without entering into spin.
• To proceed through to a drain or spin, once
the rinse hold function is completed using to
program dial scroll to the required program.
The required lamp will light up for
identification.
17