Replacing The Led Module - HP IDB5220N User Manual

8. Reset the lamp time counter:
On the remote control, press Menu. Use the arrow buttons to select the Setup menu and press OK.
a.
Then use the arrow buttons to select About and the press OK.
With the About screen displaying on the television, press the right arrow button three times. In the
b.
Lamp service screen, press the red button on the remote control to reset the lamp time counter and
then press OK.

Replacing the LED Module

The LED module is not a customer-replaceable part. If this part is need of repair, contact HP service personnel. Refer
to "Support and Repair" on page 45.
43
Fixing Problems