Parts And Features; To Dry Iron - Hamilton Beach 14885C Product Manual

840125000 ENv01.qxd 12/14/04

Parts and Features

1. Temperature Control
2. Spray and Blast Buttons
3. Water Tank Fill Cover
4. Soleplate
5. Self-Clean Button
6. Water Tank
7. Auto Shutoff Reset Button*
8. Power On Light/Automatic Shutoff Status Indicator
9. Heel Rest
10. Swivel Cord
3:04 PM Page 4
*on selected models only
4

To Dry Iron

1. Plug in iron.
2. Set Temperature Control to desired temperature.
Allow 3 minutes for iron to reach desired temperature.
3. To turn iron off, set Temperature Control to OFF ( O ) and
unplug the iron.
To Steam Iron
1. Unplug iron. Open water tank fill cover. Using a cup, slowly
pour 10 ounces (310 ml) of tap water into the water tank
opening. Close water tank fill cover.
2. Plug in iron.
3. With iron in upright position, set Temperature Control to
desired setting in steam range. Allow 3 minutes for iron to
reach desired temperature. Do not preheat the iron with
the soleplate facing down.
4. To turn iron off, set Temperature Control to OFF ( O ) and
unplug the iron.
5. Empty water from the iron following directions in "Caring
for Your Iron and Soleplate."
Water
Please use ordinary tap water. If you have extremely hard
water, alternate between tap water and distilled water for
use in the iron.
5