Fabric Setting Chart - Hamilton Beach 14885C Product Manual

840125000 ENv01.qxd 12/14/04

Fabric Setting Chart

Steam To Iron
Setting
0 Off
Nylon
1 Dry iron on the wrong side of the fabric.
O
2 Acrylic
Dry iron on the wrong side of the fabric.
2 Silk
Dry iron on the wrong side of the fabric.
3 Polyester Iron with fabric still damp.
4 Rayon
Iron on the wrong side of fabric.
4
Wool
Steam iron on the wrong side of fabric.
5 Cotton
Iron while still damp using steam
and/or spray.
6
Linen
Iron on wrong side of fabric while still
damp.
3:04 PM Page 8
Ironing Instructions
8
Caring for Your Iron
Iron
1. Turn Temperature Control to OFF ( O ). The Water Tank of
your iron should be emptied after each use. Unplug the
iron and hold over a sink. Turn iron upside down until
Water Tank Opening is parallel with sink. Water will run out
of water tank opening.
2. After iron has completely cooled, wrap cord loosely around
iron and store in an upright position. Do not store iron
laying flat on soleplate.
Soleplate
1. Never iron over zippers, pins, metal rivets, or snaps, as
these may scratch the soleplate.
2. To clean occasional build-up on the soleplate, wipe with
a sudsy cloth. Do not use abrasive cleansers or metal
scouring pads.
3. Always store iron upright in the heel rest position.
9