Table of Contents
Advertisement
Follow the instructions below.
Do not speed up the defrosting process by using any
devices or tools other than the scraper provided, you
may damage the refrigeration circuit.
The refrigerator has an automatic defrosting function:
water is ducted to the back of the appliance by a
There is no need to defrost the freezer since the
"ventilated cold air" cooling system prevents the
formation of frost and ice on the walls.
special discharge outlet
( see diagram ) where the
heat produced by the
compressor causes it to
evaporate. It is
necessary to clean the
discharge hole regularly
so that the water can
flow out easily.
To replace the light bulb in the refrigerator
compartment, pull out the plug from the electrical
socket. Follow the instructions below.
Access the light bulb (A) by unscrewing the fixing
screw (B) which is located at the back of the
lampcover, as shown ( see diagram ). Replace it with a
similar light bulb, the power of which should not
exceed 15W.
A
B
Advertisement
Table of Contents
