Identifying The Parts (Main Unit) - Teac SR-80i Owner's Manual

011
Identifying the Parts (Main Unit)
"III
- VOLUME
+
fJ
Standby/On (<9/1)
Press this button to turn the unit on and put it into
standby.
ECO POWER mode
To save energy, the unit turnsto the EGO POWER
mode in the following cases:
• If no iPod oriPhone is inserted in the dock,and
three minutes have passed since power has
been set to standby
• If no iPod or iPhone is inserted in the dock
and no operation has been, conducted for·
. 18 minutes when the power is
ON
and the
source is set to "iPod"or 'USB"
.Ifno iPod or iPhone is inserted in the dock,
pressing the Standby/On(<!>/1) button for more
than 3se,f:onds when the power is in standby
When the unit is in ECO POWER n;Jode, EGO POWER
indicator lights and nothing appears on. the display.
In ECOPOWER mode, press the StandbyIOn(<!>/I)
button to turn the unit on.
,_..1'
I]
Play/Pause
(~/II)
When the source is ''iPod'' or "USB", press this button to
start or pause playback.
[!I
Stop (-)
When the source is "USB", press this button to stop
playback.
m
FUNCTION
Press this button to select a source.
Il
VOLUME (
-I +)
Press these buttons to adjust the volume level.
o
iPod/iPhone dock
Insert an iPod/iPhone into this dock.
To prevent dust from accumulating on the dock
connector, set the supplied dock cover when it is not
being used.
m
Display
Displays the clock, current source, etc.
Cl
Remote sensor
When operating the remote control unit, point it
towards here.
DECO POWER indicator
Lights when the unit is in ECO POWER mode.
o
Speakers (Stereo)
9