Identifying The Parts (Remote Control Unit) - Teac SR-80i Owner's Manual

Identifying the Parts (Remote Control Unit)
~ FUNCTION
Press this button to select a source.
[iJ
STANDBY/ON
(!)/I)
Press this button to turn the unit on and put it into
standby.
ECO POWER mode
To save energy, the unit turns to the ECO POWER
mode in the following cases:
• If no iPod or iPhone is inserted in the dock, and
three minutes have passed since power has
been set to standby
• If no iPod or iPhone is inserted in the dock
and no op.eration has been conducted for
18 minutes when the power is ON and the
source is set to ''iPod'' or "USB"
• If no iPod or iPhone is inserted in the dock,
pressing the Standby/On (e>/I) button for more
than 3 seconds when the power is in standby
When the unit is in ECO POWER mode, ECO POWER
indicator lights and nothing appears on the display.
In ECO POWER mode, press the Standby/On (e>/I)
button to turn the unit on.
After the wakeup timer on time is reached, press this
button to turn the unit to standby (off) for 6 minutes.
~
ALARM 1,2
Hold down these buttons for more than 2 seconds to
enter the wakeup timer setting mode (page 26).
After setting the wake up timer, press these buttons
briefly to display the setting one by one.
These buttons are also used to turn the wake up timer
function on and off.
[!]
SNOOZE/DIMMER
Press this button to change the brightness of the
display.
-+\--@]
'-=~+---@]
......-.:+-~
rcr~.;+-L-""':::"""':....J
~
RDS
~f---i-iH
rnr-rr--~=----­
ool--!+-----,-"-----.
lliJ
OJ
~
[]]
[E]
rn
~
@]
~
RDS/Shuffle
(X)
When the source is "iPod" or "USB", press this button to
to turn on and off the shuffle playback.
To simplify explanations, instructions in this manual
might refer to the main unit or remote control unit only.
In such cases, the same controls on the remote control
and main unit will operate similarly.
The RDS (Radio Data System) function does not work
with this unit.
10