KitchenAid KUDP02FRSS1 Installation Instructions Manual page 17

Check operation
1. Read the Use and Care Guide that came with your
dishwasher.
2. Check that all parts have been installed and no steps
were skipped.
3. Check that you have all the tools you used.
4. Start dishwasher and allow it to complete the shortest
wash cycle. After the first two minutes, unlatch door,
wait five seconds, then open door.
5. Check to see that there is water in the bottom of the
dishwasher tub. Check that dishwasher is working
properly. If not, see "If dishwasher does not operate"
section.
6. Disconnect power or unplug dishwasher.
if dishwasher does not operate
First try the solutions suggested here to possibly avoid the
cost of a service call.
e Has the circuit breaker tripped or the house fuse blown?
o Is the door closed tightly and latched?
e Has the cycle been set correctly to start the dishwasher?
® Is the water turned on?
If none of these work, call 1-800-422-1230.
17