Snooze Function; About The Alarm - Oregon Scientific RM868P User Manual

Language
Monday Tuesday Wed. Thursday Friday Saturday Sunday
English
German
French
Italian
Spanish
10.Press [MODE] to save the changes and exit. If changes are made
during the process, the seconds will reset and start from zero.
The unit will also save all changes and return to normal display
automatically after the unit has been left idle for a minute.

ABOUT THE ALARM

This unit is equipped with a daily alarm function.
To set the alarm,
1. Press [ALARM] to change both the digital and analog display
to the alarm-time display mode.
2. Press and hold [ALARM] for 2 seconds.
3. Use [ ] / [ ] to enter the hours. The hand of hour on the
analog display will be adjusted simultaneously.
4. Press [ALARM] .
Day-of-the-week
5. Use [ ] / [ ] to enter the minutes. The hand of minutes on
the analog display will be adjusted simultaneously.
6. Press [ALARM] .
The alarm will be automatically activated. The [
appear. To deactivate the alarm, press [
time is displayed.
HOW TO USE THE DAILY ALARM
An alarm will go off for 2 minutes in two-step crescendo patterns if
undisturbed. The [ ] icon will flash, the back-light and the clock
projection will be activated for 5 seconds. To mute the alarm, press
any key. Pressing [
SNOOZE

SNOOZE FUNCTION

When the snooze function is activated, the alarm will be muted
temporarily and set off again after 8 minutes. To disable the snooze
function, press [ALARM].
7
] icon will
] / [ ] when the alarm
] will activate the snooze function.