Oregon Scientific RRA320PN User Manual

LCD Clock with Projection &
Analogue FM Radio
Model: RRA320PN

USER MANUAL

LCD Clock with Projection & LCD Clock with Projection &
EN
Analogue FM Radio Analogue FM Radio
OVERVIEW
Model: RRA320PN Model: RRA320PN
FRONT VIEW (FIG. 1)
USER MANUAL USER MANUAL
EN EN
1
2
OVERVIEW OVERVIEW
FRONT VIEW (FIG. 1) FRONT VIEW (FIG. 1)
1. AM / PM
1 1
2. Clock
2 2
3. Radio ON
4. Sleep mode ON
5. Alarm 1 / 2 ON
6. Low Battery indicator
1. 1. AM / PM AM / PM
2. 2. Clock Clock
BACK VIEW (FIG. 2)
3. 3. Radio ON Radio ON
4. 4. Sleep mode ON Sleep mode ON
5. 5. Alarm 1 / 2 ON Alarm 1 / 2 ON
１
6. 6. Low Battery indicator Low Battery indicator
２
3
4
BACK VIEW (FIG. 2) BACK VIEW (FIG. 2)
5
6
7
8 9
１ １
1. FOCUS Wheel: Adjust Projection Focus
２ ２
3 3
2. RADIO: Turn radio On / Off
4 4
3. ALARM 1 and 2: Select alarm type, BEEP / OFF /
5 5
RADIO
6 6
4. + / - : Increase / decrease values of the selected
7 7
8 8 9 9
setting
1. 1. FOCUS Wheel: Adjust Projection Focus FOCUS Wheel: Adjust Projection Focus
5. / SET /
2. 2. RADIO: Turn radio On / Off RADIO: Turn radio On / Off
display / View respective alarm status; set alarm
3. 3. ALARM 1 and 2: Select alarm type, BEEP / OFF / ALARM 1 and 2: Select alarm type, BEEP / OFF /
6. DIMMER: Select display brightness LO / HI
RADIO RADIO
7. PROJECTION ON: Enable / disable continuous
4. 4. + / - : Increase / decrease values of the selected + / - : Increase / decrease values of the selected
projection
setting setting
8. 180° ROTATION: flip image180°
5. 5. / SET / SET / /
9. RESET: Reset unit to default settings
display / View respective alarm status; set alarm display / View respective alarm status; set alarm
10. AC / DC Socket
6. 6. DIMMER: Select display brightness LO / HI DIMMER: Select display brightness LO / HI
11. Battery compartment
7. 7. PROJECTION ON: Enable / disable continuous PROJECTION ON: Enable / disable continuous
projection projection
TOP VIEW (FIG. 3)
8. 8. 180° ROTATION: flip image180° 180° ROTATION: flip image180°
9. 9. RESET: Reset unit to default settings RESET: Reset unit to default settings
10. AC / DC Socket 10. AC / DC Socket
11. Battery compartment 11. Battery compartment
TOP VIEW (FIG. 3) TOP VIEW (FIG. 3)
1. VOL: Mute / adjust radio volume
2. SNOOZE / SLEEP: silence alarm for 8 minutes
3. TUNE: Select radio frequency
GETTING STARTED
1. 1. VOL: Mute / adjust radio volume VOL: Mute / adjust radio volume
INSERT BATTERIES
2. 2. SNOOZE / SLEEP: silence alarm for 8 minutes SNOOZE / SLEEP: silence alarm for 8 minutes
1. Plug AC / DC adaptor into socket.
3. 3. TUNE: Select radio frequency TUNE: Select radio frequency
Memory backup:
2. Remove the battery compartment cover.
3. Insert the batteries, matching the polarities (FIG. 2).
GETTING STARTED GETTING STARTED
SET CLOCK
INSERT BATTERIES INSERT BATTERIES
P/N: 086L005814-015 REV1
1. 1. Plug AC / DC adaptor into socket. Plug AC / DC adaptor into socket.
1. Press .
1/2
Memory backup: Memory backup:
2. Press + or - to change the settings.
2. 2. Remove the battery compartment cover. Remove the battery compartment cover.
3. The settings order is: 12/24 hr format, hour, minute.
3. 3. Insert the batteries, matching the polarities (FIG. 2). Insert the batteries, matching the polarities (FIG. 2).
ALARM
P/N: 086L005814-015 REV1 P/N: 086L005814-015 REV1
To set the alarm:
SET CLOCK
1/2 1/2
1. Press and hold desired SET
1. Press .
2. Press + / - to set hour / minute.
SET CLOCK
2. Press + or - to change the settings.
3. Press (or 10 seconds of inaction) to return
1. Press .
3. The settings order is: 12/24 hr format, hour, minute.
display to clock mode.
2. Press + or - to change the settings.
To activate / deactivate alarm:
3. The settings order is: 12/24 hr format, hour, minute.
ALARM
Slide to:
To set the alarm:
• OFF – disable alarm
ALARM
3
1. Press and hold desired SET
4
• BEEP - beep alarm
To set the alarm:
5
2. Press + / - to set hour / minute.
• RADIO – Radio alarm
6
1. Press and hold desired SET
To silence the alarm: 3. Press (or 10 seconds of inaction) to return
2. Press + / - to set hour / minute.
• display to clock mode. Press SNOOZE / SLEEP to silence it for 8 minutes
3. Press (or 10 seconds of inaction) to return
OR
To activate / deactivate alarm:
display to clock mode.
Slide to:
• Press , SET
To activate / deactivate alarm:
• OFF – disable alarm
3. The settings order is: 12/24 hr format, hour, minute.
SET CLOCK SET CLOCK
ALARM
To set the alarm:
1. 1. Press Press
2. 2. Press + or - to change the settings. Press + or - to change the settings.
1. Press and hold desired SET
3. 3. 2. The settings order is: 12/24 hr format, hour, minute. Press + / - to set hour / minute. The settings order is: 12/24 hr format, hour, minute.
3. Press
display to clock mode.
ALARM ALARM
To activate / deactivate alarm:
To set the alarm: To set the alarm:
Slide to:
1. 1. Press and hold desired SET Press and hold desired SET
• OFF – disable alarm
2. 2. Press + / - to set hour / minute. Press + / - to set hour / minute.
3
4
• BEEP - beep alarm
3. 3. Press Press
5
• RADIO – Radio alarm
6
display to clock mode. display to clock mode.
To silence the alarm:
To activate / deactivate alarm: To activate / deactivate alarm:
• Press SNOOZE / SLEEP to silence it for 8 minutes
Slide to: Slide to:
OR
• • OFF – disable alarm OFF – disable alarm
3 3
• Press
4 4
• • BEEP - beep alarm BEEP - beep alarm
5 5
alarm off and activate it again after 24 hours.
• • RADIO – Radio alarm RADIO – Radio alarm
6 6
To silence the alarm: To silence the alarm:
RADIO • • Press SNOOZE / SLEEP to silence it for 8 minutes Press SNOOZE / SLEEP to silence it for 8 minutes
OR OR
To activate / deactivate radio:
1. Slide RADIO ON/OFF to turn on the radio.
• • Press Press
2. Turn TUNE rotary dial to select frequency
alarm off and activate it again after 24 hours. alarm off and activate it again after 24 hours.
To adjust volume:
• Turn VOL rotary dial to mute / adjust volume.
RADIO RADIO
To activate sleep timer:
To activate / deactivate radio: To activate / deactivate radio:
• Press SNOOZE / SLEEP to enter sleep mode.
1. 1. Slide RADIO ON/OFF to turn on the radio. Slide RADIO ON/OFF to turn on the radio.
• Press SNOOZE / SLEEP to change the sleep time.
2. 2. Turn TUNE rotary dial to select frequency Turn TUNE rotary dial to select frequency
setting (120, 90, 60, 30, 15, 0 min).
To adjust volume: To adjust volume:
• • Turn VOL rotary dial to mute / adjust volume. Turn VOL rotary dial to mute / adjust volume.
PROJECTION
To activate sleep timer: To activate sleep timer:
10 11
This unit projects time information for your convenience.
• • Press SNOOZE / SLEEP to enter sleep mode. Press SNOOZE / SLEEP to enter sleep mode.
For continuous projection:
• • Press SNOOZE / SLEEP to change the sleep time. Press SNOOZE / SLEEP to change the sleep time.
• Slide PROJECTION switch when adaptor is connected,
setting (120, 90, 60, 30, 15, 0 min). setting (120, 90, 60, 30, 15, 0 min).
to enable / disable.
PROJECTION PROJECTION
To flip projected image by 180°:
10 10 11 11
This unit projects time information for your convenience. This unit projects time information for your convenience.
• Press 180° Flip.
, : Change settings /
For continuous projection: For continuous projection:
• • Slide PROJECTION switch when adaptor is connected, Slide PROJECTION switch when adaptor is connected,
To focus image:
to enable / disable. to enable / disable.
• Turn FOCUS wheel.
NOTE
To flip projected image by 180°: To flip projected image by 180°:
the projector.
• • Press 180° Flip. Press 180° Flip.
, : Change settings / , : Change settings /
RESET
To focus image: To focus image:
Press RESET to return to the default settings.
• • Turn FOCUS wheel. Turn FOCUS wheel.
NOTE NOTE
PRECAUTIONS
the projector. the projector.
• Do not subject the unit to excessive force, shock, dust,
temperature or humidity.
1
RESET RESET
• Do not cover the ventilation holes with any items such as
Press RESET to return to the default settings. Press RESET to return to the default settings. newspapers, curtains etc.
2
3
• Do not immerse the unit in water. If you spill liquid over
it, dry it immediately with a soft, lint-free cloth.
PRECAUTIONS PRECAUTIONS
• Do not clean the unit with abrasive or corrosive materials.
• • Do not subject the unit to excessive force, shock, dust, Do not subject the unit to excessive force, shock, dust,
• Do not tamper with the unit 's internal components. This
temperature or humidity. temperature or humidity.
1 1
invalidates the warranty.
• • Do not cover the ventilation holes with any items such as Do not cover the ventilation holes with any items such as
• Only use fresh batteries. Do not mix new and old batteries.
newspapers, curtains etc. newspapers, curtains etc.
2 2
3 3
• Images shown in this manual may differ from the actual
• • Do not immerse the unit in water. If you spill liquid over Do not immerse the unit in water. If you spill liquid over
display.
it, dry it immediately with a soft, lint-free cloth. it, dry it immediately with a soft, lint-free cloth.
• When disposing of this product, ensure it is collected
• • Do not clean the unit with abrasive or corrosive materials. Do not clean the unit with abrasive or corrosive materials.
separately for special
• • Do not tamper with the unit 's internal components. This Do not tamper with the unit 's internal components. This
• Placement of this product on certain types of wood
invalidates the warranty. invalidates the warranty.
may result in damage to its finish for which Oregon
• • Only use fresh batteries. Do not mix new and old batteries. Only use fresh batteries. Do not mix new and old batteries.
Scientific will not be responsible. Consult the furniture
• • Images shown in this manual may differ from the actual manufacturer's care instructions for information. Images shown in this manual may differ from the actual
display. display.
• The contents of this manual may not be reproduced
without the permission of the manufacturer.
• • When disposing of this product, ensure it is collected When disposing of this product, ensure it is collected
separately for special separately for special
• Do not dispose old batteries as unsorted municipal
waste. Collection of such waste separately for special
• • Placement of this product on certain types of wood Placement of this product on certain types of wood
treatment is necessary.
may result in damage to its finish for which Oregon may result in damage to its finish for which Oregon
Scientific will not be responsible. Consult the furniture Scientific will not be responsible. Consult the furniture
• Please note that some units are equipped with a
manufacturer's care instructions for information. manufacturer's care instructions for information.
battery safety strip. Remove the strip from the battery
compartment before first use.
• • The contents of this manual may not be reproduced The contents of this manual may not be reproduced
without the permission of the manufacturer. without the permission of the manufacturer.
NOTE The technical specifications for this product and the
• • Do not dispose old batteries as unsorted municipal Do not dispose old batteries as unsorted municipal
contents of the user manual are subject to change without
waste. Collection of such waste separately for special waste. Collection of such waste separately for special
notice.
treatment is necessary. treatment is necessary.
NOTE Features and accessories will not be available in all
countries. For more information, please contact your local
• • Please note that some units are equipped with a Please note that some units are equipped with a
retailer. battery safety strip. Remove the strip from the battery battery safety strip. Remove the strip from the battery
compartment before first use. compartment before first use.
SPECIFICATIONS
NOTE The technical specifications for this product and the
TYPE
contents of the user manual are subject to change without
/ .
MAIN UNIT
notice.
NOTE The technical specifications for this product and the
NOTE Features and accessories will not be available in all
L x W x H
contents of the user manual are subject to change without
countries. For more information, please contact your local
notice.
retailer.
NOTE Features and accessories will not be available in all
countries. For more information, please contact your local Weight
retailer.
SPECIFICATIONS
Power
TYPE
SPECIFICATIONS
/ .
MAIN UNIT
TYPE
L x W x H
/ .
MAIN UNIT
L x W x H
ABOUT OREGON SCIENTIFIC Weight
Visit our website (www.oregonscientific.com) to learn more
/ , + / - to turn the
about Oregon Scientific products.
Weight
Power
If you're in the US and would like to contact our Customer
. .
/ .
(or 10 seconds of inaction) to return
/ / . .
(or 10 seconds of inaction) to return (or 10 seconds of inaction) to return
, SET / , + / - to turn the
, SET , SET / / , + / - to turn the , + / - to turn the
If projection is illuminated, do not look directly into
If projection is illuminated, do not look directly into If projection is illuminated, do not look directly into
treatment.
treatment. treatment.
DESCRIPTION
183 x 67 x 81mm
(72 x 26.4 x 31.9in)
386 g (13.6 oz)
without battery
6 V AC adaptor
DESCRIPTION
2 x UM-4 (AAA)
1.5 V batteries
DESCRIPTION
183 x 67 x 81mm
(72 x 26.4 x 31.9in)
183 x 67 x 81mm
386 g (13.6 oz)
(72 x 26.4 x 31.9in)
without battery
386 g (13.6 oz)
6 V AC adaptor
countries. For more information, please contact your local
retailer.
NOTE The technical specifications for this product and the NOTE The technical specifications for this product and the
SPECIFICATIONS
contents of the user manual are subject to change without contents of the user manual are subject to change without
notice. notice.
TYPE DESCRIPTION
NOTE Features and accessories will not be available in all NOTE Features and accessories will not be available in all
MAIN UNIT
countries. For more information, please contact your local countries. For more information, please contact your local
retailer. retailer.
L x W x H 183 x 67 x 81mm
(72 x 26.4 x 31.9in)
SPECIFICATIONS SPECIFICATIONS
Weight 386 g (13.6 oz)
TYPE TYPE DESCRIPTION DESCRIPTION
without battery
MAIN UNIT MAIN UNIT
Power 6 V AC adaptor
2 x UM-4 (AAA)
L x W x H L x W x H 183 x 67 x 81mm 183 x 67 x 81mm
1.5 V batteries
(72 x 26.4 x 31.9in) (72 x 26.4 x 31.9in)
Weight Weight 386 g (13.6 oz) 386 g (13.6 oz)
without battery without battery
ABOUT OREGON SCIENTIFIC
Power Power 6 V AC adaptor 6 V AC adaptor
Visit our website (www.oregonscientific.com) to learn more
2 x UM-4 (AAA) 2 x UM-4 (AAA)
about Oregon Scientific products.
If you're in the US and would like to contact our Customer
1.5 V batteries 1.5 V batteries
Care department directly, please visit:
www2.oregonscientific.com/service/support.asp
For international inquiries, please visit:
www2.oregonscientific.com/about/international.asp.
ABOUT OREGON SCIENTIFIC ABOUT OREGON SCIENTIFIC
Visit our website (www.oregonscientific.com) to learn more Visit our website (www.oregonscientific.com) to learn more
about Oregon Scientific products. about Oregon Scientific products.
EU-DECLARATION OF CONFORMITY
If you're in the US and would like to contact our Customer If you're in the US and would like to contact our Customer
Hereby, Oregon Scientific, declares that this LCD Clock with
Care department directly, please visit: Care department directly, please visit:
www2.oregonscientific.com/service/support.asp www2.oregonscientific.com/service/support.asp
Projection & Analogue FM Radio (Model: RRA320PN) is in
For international inquiries, please visit: For international inquiries, please visit:
compliance with EMC directive 89/336/CE.
www2.oregonscientific.com/about/international.asp. www2.oregonscientific.com/about/international.asp.
A copy of the signed and dated Declaration of Conformity
is available on request via our Oregon Scientific Customer
Service.
EU-DECLARATION OF CONFORMITY EU-DECLARATION OF CONFORMITY
Hereby, Oregon Scientific, declares that this LCD Clock with Hereby, Oregon Scientific, declares that this LCD Clock with
Projection & Analogue FM Radio (Model: RRA320PN) is in Projection & Analogue FM Radio (Model: RRA320PN) is in
compliance with EMC directive 89/336/CE. compliance with EMC directive 89/336/CE.
A copy of the signed and dated Declaration of Conformity A copy of the signed and dated Declaration of Conformity
is available on request via our Oregon Scientific Customer is available on request via our Oregon Scientific Customer
Service. Service.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) This
device must accept any interference received, including
interference that may cause undesired operation.
WARNING Changes or modifications not expressly
FCC STATEMENT FCC STATEMENT
approved by the party responsible for compliance could
This device complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC Rules.
void the user's authority to operate the equipment.
Operation is subject to the following two conditions: (1) This Operation is subject to the following two conditions: (1) This
NOTE
This equipment has been tested and found to
device may not cause harmful interference, and (2) This device may not cause harmful interference, and (2) This
comply with the limits for a Class B digital device, pursuant
device must accept any interference received, including device must accept any interference received, including
to Part 15 of the FCC Rules. These limits are designed to
interference that may cause undesired operation. interference that may cause undesired operation.
provide reasonable protection against harmful interference
WARNING WARNING
Changes or modifications not expressly Changes or modifications not expressly
in a residential installation.
approved by the party responsible for compliance could approved by the party responsible for compliance could
void the user's authority to operate the equipment. void the user's authority to operate the equipment.
This equipment generates, uses and can radiate radio
NOTE NOTE This equipment has been tested and found to This equipment has been tested and found to
frequency energy and, if not installed and used in accordance
comply with the limits for a Class B digital device, pursuant comply with the limits for a Class B digital device, pursuant
with the instructions, may cause harmful interference to
to Part 15 of the FCC Rules. These limits are designed to to Part 15 of the FCC Rules. These limits are designed to
radio communications. However, there is no guarantee
provide reasonable protection against harmful interference provide reasonable protection against harmful interference
that interference will not occur in a particular installation.
in a residential installation. in a residential installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
This equipment generates, uses and can radiate radio This equipment generates, uses and can radiate radio
the equipment off and on, the user is encouraged to try to
frequency energy and, if not installed and used in accordance frequency energy and, if not installed and used in accordance
correct the interference by one or more of the following
with the instructions, may cause harmful interference to with the instructions, may cause harmful interference to
measures:
radio communications. However, there is no guarantee radio communications. However, there is no guarantee
• Reorient or relocate the receiving antenna.
that interference will not occur in a particular installation. that interference will not occur in a particular installation.
• Increase the separation between the equipment and
If this equipment does cause harmful interference to radio If this equipment does cause harmful interference to radio
receiver.
or television reception, which can be determined by turning or television reception, which can be determined by turning
• Connect the equipment into an outlet on a circuit
the equipment off and on, the user is encouraged to try to the equipment off and on, the user is encouraged to try to
different from that to which the receiver is connected.
correct the interference by one or more of the following correct the interference by one or more of the following
• Consult the dealer or an experienced radio / TV
measures: measures:
technician for help.
• • Reorient or relocate the receiving antenna. Reorient or relocate the receiving antenna.
• • Increase the separation between the equipment and Increase the separation between the equipment and
DECLARATION OF CONFORMITY
receiver. receiver.
• • Connect the equipment into an outlet on a circuit Connect the equipment into an outlet on a circuit
The following information is not to be used as contact
different from that to which the receiver is connected. different from that to which the receiver is connected.
for support or sales. Please visit our website at www2.
oregonscientific.com/service for all enquiries.
• • Consult the dealer or an experienced radio / TV Consult the dealer or an experienced radio / TV
technician for help. technician for help.
We
Name: Oregon Scientific, Inc.
DECLARATION OF CONFORMITY DECLARATION OF CONFORMITY Address: 19861 SW 95th Ave.,Tualatin,
Oregon 97062 USA
The following information is not to be used as contact The following information is not to be used as contact
for support or sales. Please visit our website at www2. for support or sales. Please visit our website at www2.
Telephone No.: 1-800-853-8883
Product No.: RRA320PN
oregonscientific.com/service for all enquiries. oregonscientific.com/service for all enquiries.
declare that the product
Product Name: LCD Clock with Projection &
We We
Analogue FM Radio
Name: Name: Oregon Scientific, Inc. Oregon Scientific, Inc.
Manufacturer: IDT Technology Limited
Address: Address: 19861 SW 95th Ave.,Tualatin, 19861 SW 95th Ave.,Tualatin,
Address: Block C, 9/F, Kaiser Estate,
Oregon 97062 USA Oregon 97062 USA
Phase 1,41 Man Yue St., Hung
Telephone No.: Telephone No.: 1-800-853-8883 1-800-853-8883
Hom, Kowloon,
declare that the product declare that the product
Product No.: RRA320PN Hong Kong
is in conformity with Part 15 of the FCC Rules. Operation is
Product Name: LCD Clock with Projection &
Product No.: RRA320PN
subject to the following two conditions: 1) This device may
Analogue FM Radio
Product Name: LCD Clock with Projection &
not cause harmful interference. 2) This device must accept
Manufacturer: IDT Technology Limited
Analogue FM Radio
Address: any interference received, including interference that may Block C, 9/F, Kaiser Estate,
Manufacturer: IDT Technology Limited
cause undesired operation. Phase 1,41 Man Yue St., Hung
Address: Block C, 9/F, Kaiser Estate,
Hom, Kowloon,
Phase 1,41 Man Yue St., Hung
Hong Kong
Hom, Kowloon,
is in conformity with Part 15 of the FCC Rules. Operation is
Hong Kong
subject to the following two conditions: 1) This device may
is in conformity with Part 15 of the FCC Rules. Operation is
not cause harmful interference. 2) This device must accept
subject to the following two conditions: 1) This device may
any interference received, including interference that may
not cause harmful interference. 2) This device must accept
cause undesired operation.
any interference received, including interference that may
cause undesired operation.
Manufacturer:
Address:
Product No.: Product No.:
Product Name Product Name
is in conformity
Manufacturer: Manufacturer:
subject to the f
Address: Address:
not cause harm
any interferenc
cause undesire
is in conformity is in conformity
subject to the f subject to the f
not cause harm not cause harm
any interferenc any interferenc
cause undesire cause undesire
Orolo
Orolo
IT
Orolo
PANORAMIC
VISTA ANTER
M
1
2
IT
PANORAMIC
IT
VISTA ANTER
1. AM / PM
PANORAMICA
2. Orologio
VISTA ANTER
3. Radio ON
1
4. Modo Sle
2