Page 1
. o r e g o n s c i e n t i f i c . c o m RADIO CONTROLLED CLOCK WITH Higlo MODEL NO.: RM806 USER’S MANUAL ON/OFF R A D I O...
Page 2
Travel Alarm Clock Owner: Congratulations on your purchase OREGON SCIENTIFIC’s radio controlled auto-setting always-accurate alarm clock! The RM806 is a clock that automatically sets the time and date from signals broadcast by the US Atomic Clock, one of the world's most accurate timekeepers. This extraordinary timepiece, located outside Boulder, Colorado, is operated by the U.S.
Page 3
Description of Function keys (Figure A) Snooze/light (Figure A.1) Pressing the bar on the top of The Radio Controlled Clock activates the HiGlo electroluminescent backlight for 5 seconds. When the alarm sounds, pressing this Snooze/Light bar also activates the eight-minute snooze function.
Page 4
Press the MODE key once to switch between the display of either the Day of the Week or Seconds on the clock. Radio Controlled Clock will continue to display the selected function (Day or Seconds) until the MODE button is pressed again.
Page 5
The top line of the display shows the hours, minutes and seconds (AM/PM) of the clock. Pressing the MODE button once will switch the “Seconds” display to the Day of the Week. The Radio controlled Clock will continue to display the selected function (Day or Seconds) until the MODE button is pressed again.
Radio Controlled Clock: The RM806 will automatically synchronize current time and date with the signal broadcast by the US Atomic Clock when the product is in reception range of the signal.
When the reception is completed the reception icon will stop blinking. The reception icon will show [ best signal reception, place the RM806 away from other equipment that emit RF or microwave signals such as TV's, radios, PC's or microwave ovens. Other causes for signal interference include electrical power transmission towers, steel reinfoced concrete construction, and/or metal siding.
NOTE: As soon as any change in the alarm time is made the alarm icon ((•)) will automatically appear indicating that the alarm is activated. IMPORTANT: The Radio Controlled Clock will continue to display the “ALARM” time until the ((•)) 24h Date”...
Page 9
5) When the desired minutes time is reached, briefly press the MODE button five more times to exit the clock time set mode. IMPORTANT : As soon as any manual change in the clock time is mode, there is a loss of the signal strength indicator from the display.
• Be certain the antenna cord is fully extended and look Loss of • May be caused by interference. signal • If the problem persists, move the clock or antenna to Other • Call Oregon Scientific at 800-853-8883 or through Problem TROUBLE SHOOTING Remedy installed correctly moved.
• Integrated radio receiver for reception of time signal 10kW transmitter WWVB: at 60Khz • Operating temperature: 35-120°F • Typical operating time on one battery set is up to one year, subject to backlight usage • Setting time with interference-free reception: 3-7 minutes •...
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. o Consult the dealer of an experienced radio/TV technician for help. Company Name: Oregon Scientific, Inc. Address: 19861 SW 95th Place, Tualatin, Oregon 97062, USA Telephone Number: 1-800-853-8883...
Need help?
Do you have a question about the RM806 and is the answer not in the manual?
Questions and answers