Complete Installation - KitchenAid KUDD03STBL0 Installation Instructions Manual

3. Attach dishwasher to upper cabinet mounting brackets.
Option 1: Solid surface countertop
• Attach dishwasher to the side cabinet mounting brackets
(installed earlier).
2. Pull slide rails forward until they snap into position.
A
//
A. Attach dishwasher to side cabinet mounting brackets.
Option 2: Wood countertop
• Attach the dishwasher to the countertop using the folded over
mounting tabs located on the top of the dishwasher.
3. Push top drawer in and repeat above steps for bottom drawer.
4. In the cabinet under the sink, coil excess drain hose and wrap
with a zip tie. Plug in dishwasher or reconnect the power.
A
A. Attach dishwasher to countertop using folded over mounting tabs.
1. Pull top drawer slide rails out and set top drawer on slide rails.
5. Select the Rinse Only cycle and press START/RESUME. Allow
the dishwasher to fill, rinse and drain. Check for leaks. If leaks
are found, secure the connection and repeat this step.
If you need Assistance or Service:
Please reference the "Assistance or Service" section of the User
Instructions or contact the dealer from whom you purchased your
dishwasher.
15