Listening To Xm Satellite Radio - Denon DN-A7100 User Manual

Av surround preamplifier
Hide thumbs Also See for DN-A7100:
Table of Contents

Advertisement

LISTENING TO XM SATELLITE RADIO

SELECTING AN INPUT SOURCE
Before you can listen to XM Satellite Radio, you must
fi rst select the input source on the DN-A7100.
1.
2.
(Using the DN-A7100)
1.
Turn the INPUT SELECTOR knob to select
"TUNER".
2.
Press the BAND button to select XM band.
(Using the remote control unit)
1.
To select tuner, Press the TUNER button on the
remote.
2.
Press the BAND button to select XM band.
C H E C K I N G T H E X M S I G N A L S T R E N G T H
AND RADIO ID
1.
2.
1.
Press the T.DISP button 3 times to displayed
Signal Status.
1.
S I G N A L :
• The display changes as shown below according to
the receiving condition.
SIGNAL: ■■■■■■
SIGNAL: STRONG
(Signal strength is good)
SIGNAL: ■■■■
SIGNAL: MARGINAL
(Signal strength is Marginal)
SIGNAL: ■■
SIGNAL: WEAK
(Signal strength is poor)
XM NO SIGNAL
SIGNAL: NON
(Loss of the signal)
2.
Adjust the antenna location until signal strength
is good.
3.
Select channel 0 (XM000) with the 3 or 4
cursor buttons of the DN-A7100 or the TUNING
–/+ buttons of the remote control unit.
3.
• The Radio ID is displayed.
X M O O O R A D I O
I D
Notes:
• If "ANTENNA" appears in the front panel display,
the XM Connect-and-Play antenna or XM-Mini
Tuner may not be connected to the XM terminal on
the rear panel of this unit properly.
• The ATT function is also effective when XM is
selected.
SWITCHING XM INFORMATION IN THE FRONT
PANEL DISPLAY
You can display XM information (such as artist name/
song title, category or signal status) for the channel
currently selected in the front panel display.
3.
1.
1.
Press the T.DISP button to displayed
C h a n n e l n u m b e r / n a m e
A r t i s t n a m e / S o n g t i t l e
C h a n n e l c a t e g o r y
S i g n a l S t a t u s
When the Channel number/name is displayed:
X M O 4 0 : D e e p T r c
4 0 : D e e p T r a c k s
(If text is more than 13 characters long, the text is
scrolled.)
Note:
The front Panel display can indicate up to 13 alphanumeric
characters at once. If the information contains more then
13 characters, the information scrolls from right to left.
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents