KitchenAid KUDS30IXBL0 Installation Instructions Manual page 8

Wood cabinet: Sand holeuntilsmooth.
Metal c abinet: Cover h olewithgrommet i ncluded w ith
power supply cordkit.
Option
B, Direct Wire:
Helpful "lip: Wiring the dishwasher will be easier if you
route the cable into the cabinet opening from the right side.
Drill a 3/4" (1.9 cm) hole in right-hand cabinet side or rear.
See product and cabinet opening dimensions.
Wood cabinet: Sand the hole until smooth.
Metal cabinet: Cover hole with grommet (not provided).
8
Route cable from power supply through cabinet hole (cable
must extend to the right front side of cabinet opening).
Tape cable to the floor in area shown. This will prohibit
cable from moving when dishwasher is moved into
cabinet opening.
Prepare and Roule Waler Line
Helpful Tip: Routing the water line through the left side
of cabinet opening will make water connection easier.
Drill a 1/2" (1.3 cm) hole in the cabinet side or rear.
Measure overall length of copper tubing or flexible
braided water supply line. Attach to the hot water line
using a connection configuration that is in compliance
with local codes and ordinances. The water line to the
dishwasher should have a manual shutoff valve.