Table of Contents
Advertisement
Editing the
Caller Filter List
Setting the
Caller Filter
Transferring
Phone Numbers
to the
Caller Filter
20 Menu: Caller Filter
You can store up to 10 phone numbers in a caller filter list.
Calls with these numbers can be accepted or blocked. For the
caller filter to function, the caller's number must be transmit-
ted via ISDN.
If activated """ the display shows a caller filter icon
the time.
All entries in this chapter are started by pressing the softkeys:
F
Menu
Caller Filter OK
Then select ...
F
List of numbers OK
An entry can consist of a maximum of 32 digits for the
number and 16 characters for the name. If you enter a star
digit at the end of a number, you can filter all numbers that
begin with this sequence. Let's assume, for example, you enter
the following: "123*". All numbers that start like that would
be filtered (e. g. "12345678 and 12398765").
F
Filter Options OK Accept List or Block List or
Filter off / OK
The activated filter option is indicated by a """. Select Accept
List to receive calls with phone numbers which are stored in
the caller filter list. Select Block List, to reject calls with this
phone numbers. Select Filter off to disable the caller filter
function.
For transferring phone numbers from the Telephone Book, the
Redial List and the Caller List to the Caller Filter refer to
Menu: Telephone Book Settings starting on page 33, Menu: Re-
dial List starting on page 37 and Menu: Caller List starting on
page 38.
Z
edit number / enter name OK
behind
45
Advertisement
Table of Contents
