Table of Contents
Advertisement
5. Installation
5-3. Varifocal Lens adjustment
Open dome bubble and cover as 5-1 & 5-2.
Unfasten Tilt Locking Lever by turning counter clockwise and adjust Camera to
wanted location. And then, fasten Tilt Locking Lever tightly by turning clockwise.
Adjust focus using Tele-Wide & Near-Far Knob.
Zoom
Focus
5-4. Tool-free 3-Axis mounting mechanism
Perfect Tri-axis
Panning axis up to 360° degree
Tilting axis up to 90° degree
Rotation axis up to 180° degree
a. Panning 360°
Pan Camera Set by turning post which is a camera set
holder.
b. Tilting 90°
Tilt Camera Set by turning Tilt Locking Lever.
c. Rotation 180°
Rotate Camera set by grasping and turning the serration in the front of the camera.
8
5. Installation
5-5. Installation overview
(1) Ceiling mount
Zoom Knob
Focus Knob
Drill holes on the ceiling after doing paste a drilling template to wanted spot.
Put Fixed Screws supplied in the screw hole on the Dome Base and penetrate
drilling holes on the Ceiling Tile. And then, assemble them to the holes on the
Adaptor Plate.
After fixing the location of the Camera, push the Dome Ass'y
(Dome Bubble and Cover) to the Dome Base.
Power
Video
Adaptor plate
Ceiling Tile
Drilling template
Camera
Fixed Screw
Dome-Ass'y
9
Advertisement
Table of Contents
